IP Catalog > Interface IP > Interconnect IP > USB IP > USB On-The-Go IP > USB On-The-Go Controller IP

USB On-The-Go Controller IP

Welcome to the ultimate USB On-The-Go Controller IP hub! Explore our vast directory of USB On-The-Go Controller IP
All offers in USB On-The-Go Controller IP
Filter
Filter
Search (24)
Compare 24 USB On-The-Go Controller IP from 12 vendors (1 - 10)
  • USB 2.0 PHY For On-The-Go Controller
    • Complies with USB specifications, rev. 2.0 and 1.1
    • Complies with UTMI+ specification, level 3, rev. 1.0
    • Supports OTG USB 2.0
    • Supports 480Mb/s (HS), 12Mb/s (FS) and 1.5MB/s (LS) serial data transmission rates
    Block Diagram -- USB 2.0 PHY For On-The-Go Controller
  • USB 2.0 On-The-Go Controller
    • High speed support: 480 Mbit/s
    • Full speed support: 12 Mbit/s
    • USB 2.0 Compliant
    • High/Full speed support using 8/16 bit UTMI/ULPI interface
    Block Diagram -- USB 2.0 On-The-Go Controller
  • USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
    • USB-IF Certified full-feature Dual Role Device Controller solution
    • Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
    • Compliant with USB 3.1 specification revision 1.0 with latest ECNs
    • Compliant with xHCI specification revision 1.1
    Block Diagram -- USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
  • USB 3.1 SuperSpeed Device Controller (USB-IF Certified)
    • USB-IF Certified full-feature Device Controller solution
    • Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
    • Compliant with USB 3.1 specification revision 1.0 with latest ECNs
    • Compliant with xHCI specification revision 1.1
    Block Diagram -- USB 3.1 SuperSpeed Device Controller (USB-IF Certified)
  • USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
    • Support SW controlled host/device role switching.
    • Support Superspeed, Highspeed and Fullspeed
    • Support Control, Bulk, Interrupt and Isochronous Transfer Types
    • Support U1/U2/U3 power saving modes for USB 3.x port
    Block Diagram -- USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
  • USB 2.0 On-The-Go (USB20OTG)
    • - Supports both USB Host and USB Device peripheral functionality
    • - Supports UTMI + Low Pin interface (ULPI) interface
    • - Supports Asynchronous Avalon clock interface
    • - Configurable Memory depth
  • USB 2.0 OTG Full/Low-Speed Dual Role Core
    • Fully compliant to USB Specification 2.0 and the On-The-Go Supplement, Revision 1.0
    • Full-/Low-Speed Device and Host capability (12Mbps/1.5Mbps)
    • Supports Host Negotiation Protocol (HNP)
    • Supports Session Request Protocol (SRP)
  • USB 2.0 OTG High/Full/Low-Speed Dual Role Core
    • Fully compliant to USB Specification 2.0 and the On-The-Go Supplement, Revision 1.0
    • Fully compliant to UTMI Specification 1.05 and UTMI+ Specification 1.0 up to UTMI+ level 3
    • Fully compliant to UTMI+ Low Pin Interface Specification 1.0
    • High-/Full-/Low-Speed device and host capability (480Mbps/12Mbps/1.5Mbps)
  • USB2.0 On-The-Go
    • VHDL / Verilog source code provided
    • High Speed OTG specification compliant
    • Supports low, full and high speed operation
    • Low cost Architecture with low gate count
  • USB 2.0 (LS, FS & HS) On-The-Go IP Core
    • "USB 2.0 HS-OTG" Certified
    • True Dual-Role capability
    • OTG host mode capability
    • Full USB peripheral capability
×
Semiconductor IP