USB 3.1 Controller IP
Welcome to the ultimate USB 3.1 Controller IP hub! Explore our vast directory of USB 3.1 Controller IP
All offers in
USB 3.1 Controller IP
Filter
Compare
18
USB 3.1 Controller IP
from 6 vendors
(1
-
10)
-
Complete USB Type-C Power Delivery PHY, RTL, and Software
- USB PD 3.1 compliant.
- 8 bit register interface for a low speed processor, or optional I2C interface.
- Integrated Chapter 6 protocol reduces required MPU response time to 10mS.
-
eUSB 3.1 Gen 2 Device Controller - Software Enumeration, FIFO Interface
- Software Enumeration
- FIFO Interface
-
SuperSpeed USB 3.1 Host Controller
- Industry’s only USB Type-C IP solution consisting of USB-C 3.1/DisplayPort 1.3 Tx PHYs, USB-C 3.1/DisplayPort 1.3 Tx controllers with HDCP 2.2 and HDCP 1.4 content protection, verification IP, IP subsystems, IP prototyping kits, and IP software development kits
- Solution supports USB Type-C, SuperSpeed USB 3.1 at 10 Gbps, SuperSpeed USB 3.0 at 5 Gbps and High-Speed USB (USB 2.0) as well as DisplayPort 1.3 Tx supporting RBR, HBR1, HBR2 and HBR3 bitrates
- Controllers support Device, Host, and Dual-Role Device USB-C 3.1 as well as DisplayPort 1.3 Tx with HDCP 2.2 content protection
-
SuperSpeed USB 3.1 DRD Controller
- Industry’s only USB Type-C IP solution consisting of USB-C 3.1/DisplayPort 1.3 Tx PHYs, USB-C 3.1/DisplayPort 1.3 Tx controllers with HDCP 2.2 and HDCP 1.4 content protection, verification IP, IP subsystems, IP prototyping kits, and IP software development kits
- Solution supports USB Type-C, SuperSpeed USB 3.1 at 10 Gbps, SuperSpeed USB 3.0 at 5 Gbps and High-Speed USB (USB 2.0) as well as DisplayPort 1.3 Tx supporting RBR, HBR1, HBR2 and HBR3 bitrates
- Controllers support Device, Host, and Dual-Role Device USB-C 3.1 as well as DisplayPort 1.3 Tx with HDCP 2.2 content protection
-
SuperSpeed USB 3.1 Device Controller
- Industry’s only USB Type-C IP solution consisting of USB-C 3.1/DisplayPort 1.3 Tx PHYs, USB-C 3.1/DisplayPort 1.3 Tx controllers with HDCP 2.2 and HDCP 1.4 content protection, verification IP, IP subsystems, IP prototyping kits, and IP software development kits
- Solution supports USB Type-C, SuperSpeed USB 3.1 at 10 Gbps, SuperSpeed USB 3.0 at 5 Gbps and High-Speed USB (USB 2.0) as well as DisplayPort 1.3 Tx supporting RBR, HBR1, HBR2 and HBR3 bitrates
- Controllers support Device, Host, and Dual-Role Device USB-C 3.1 as well as DisplayPort 1.3 Tx with HDCP 2.2 content protection
-
USB 3.1 Gen1 / Gen2 Host Controller IP
- USB 3.1 Host Controller can be configured to support all types of USB transfers – Bulk, Interrupt and Isochronous.
- Allows dynamic configuration to support configurable number of endpoints, interfaces, alternate interfaces and configurations.
- USB 3.1 Host Controller can be configured to support any combinations of USB 3.1 interface speeds – SSP (10 Gbps), SS(5 Gbps), HS (480 Mbps), FS(12 Mbps) and LS(1.5 Mbps). Eg combinations are SSP & SS only, SSP & SS & HS only, SSP & SS & HS & FS only, SS Only, SS & HS Only, SS & HS & FS Only, HS & FS Only etc.
- USB 3.1 Host Controller has full support for all low power features of the USB Specification supporting Suspend and Remote Wakeup, USB 3.1 Low Power States – U1/U2/U3 and USB 2.0 Link Power Management states – L1, L2.
-
USB 3.1 SuperSpeed+ (Gen2) Embedded Host Controller (USB-IF Certfied)
- USB-IF Certified full-feature Embedded Host Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 3.1 SuperSpeed Embedded Host Controller (USB-IF Certified)
- USB-IF Certified full-feature Embedded Host Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 3.1 SuperSpeed+ (Gen2) Dual-Role Device Controller (USB-IF Certified)
- USB-IF Certified full-feature Dual Role Device Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1
-
USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
- USB-IF Certified full-feature Dual Role Device Controller solution
- Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
- Compliant with USB 3.1 specification revision 1.0 with latest ECNs
- Compliant with xHCI specification revision 1.1