SATA IP for UMC
Welcome to the ultimate SATA IP for UMC hub! Explore our vast directory of SATA IP for UMC
All offers in
SATA IP
for UMC
Filter
Compare
15
SATA IP
for UMC
from 6 vendors
(1
-
10)
-
SATA 6G PHY in UMC (40nm, 28nm, 22nm)
- Compliant with SATA/eSATA v3.3, AHCI v1.3 and SATA PIPE v4.3 specifications
- AMBA 2.0 AHB and AMBA 3 AXI subsystem interfaces
- AMBA 4 AXI and ACE-Lite bus interfaces
- Memory data protection and memory address parity protection
-
Serial ATA (SATA) I/II PHY IP CORE
- Supports 1.5 Gb/s (Gen 1) and 3.0 Gb/s (Gen 2) serial data rate
- Compatible with Serial ATA II
- Utilizes 10-bit or 20-bit parallel interface to transmit and receive Serial ATA data
- Data and clock recovery from serial stream on the SATA bus
-
PCIe 3.0/3.1/USB3.0/SATA3 Combo PHY
- Standard PHY interface enables multiple IP sources for PCI Express Logical Layer and provides a target interface for PCI Express PHY vendors.
- Supports 2.5Gb/s only or 2.5Gb/s,5.0Gb/s and 8.0Gb/s serial data transmission rate
- Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive PCI Express data
- Allows integration of high speed components into a single functional block as seen by the endpoint device designer.
-
SATA 3.0 PHY
- OOB Generation and Detection
- Elasticity Buffer Optional
- Alternative Host or Device Power-on Sequence State Machine
- Speed Reduction Negotiation in Device Mode
-
SATA 6G PHY
- ? 6-Gbps transmission rate through standard SATA cable
- ? Spread-spectrum clock (SSC) generation and absorption
- ? Programmable down-spread (+4,980 ppm through -4,980 ppm)
- ? Fully clock-forwarded transceiver interface, configurable using soft PMA layer above hard macro PHY
-
Serial ATA PHY
- 1.5 / 3.0 Gbps
- Complies with SATA 3.0 Specification