SATA PHY IP for SMIC
Welcome to the ultimate SATA PHY IP for SMIC hub! Explore our vast directory of SATA PHY IP for SMIC
All offers in
SATA PHY IP
for SMIC
Filter
Compare
5
SATA PHY IP
for SMIC
from 4 vendors
(1
-
5)
-
SATA 6G PHY in SMIC (40nm, 28nm)
- Compliant with SATA/eSATA v3.3, AHCI v1.3 and SATA PIPE v4.3 specifications
- AMBA 2.0 AHB and AMBA 3 AXI subsystem interfaces
- AMBA 4 AXI and ACE-Lite bus interfaces
- Memory data protection and memory address parity protection
-
PCIe 3.0/3.1/USB3.0/SATA3 Combo PHY
- Standard PHY interface enables multiple IP sources for PCI Express Logical Layer and provides a target interface for PCI Express PHY vendors.
- Supports 2.5Gb/s only or 2.5Gb/s,5.0Gb/s and 8.0Gb/s serial data transmission rate
- Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive PCI Express data
- Allows integration of high speed components into a single functional block as seen by the endpoint device designer.
-
SATA 3.0 PHY
- OOB Generation and Detection
- Elasticity Buffer Optional
- Alternative Host or Device Power-on Sequence State Machine
- Speed Reduction Negotiation in Device Mode
-
SATA 6G PHY
- ? 6-Gbps transmission rate through standard SATA cable
- ? Spread-spectrum clock (SSC) generation and absorption
- ? Programmable down-spread (+4,980 ppm through -4,980 ppm)
- ? Fully clock-forwarded transceiver interface, configurable using soft PMA layer above hard macro PHY
-
USB 3.0/ PCIe 3.0/ SATA 3.0 Combo PHY IP, Silicon Proven in SMIC 14SF+
- Support for SATA3(6.0Gbps) ,USB3.0(5Gbps) and PCIe3(8.0Gbps),
- Backward compatible with 1.5Gbps, 3.0bps for SATA
- Backward compatible with 2.5Gbps and 5Gbps for PCIe
- Full compatible with PIPE4 interface specification