Ethernet 10G KR Serdes
Overview
The VHT1T28KR10 is an enhanced multi-lane 10G Ethernet Hard macro that is compatible with data transfer capabilities up to 10Gbps(10GBASEKR) and XAUI. It is designed with a standard multilane interface to the core side. It has the added advantage of not requiring an external resistor, hence saving area at the system level and a pin at the chip level.
Key Features
- Quad Channel Multi Lane Macro
- Integrated backplane PCS, PMA layer
- High-Speed Data Transfer
- Up-to 10Gbps per lane
- Support for Link Training, FEC, Auto-Negotiation
- High performance system interface
- SDR XGMII interfaces to 1G/10G Transmit De-emphasis and Receive Adaptive Equalization
- Supported Lane widths of x1, x2, x4
- Encoding standards: 64b/66b
- Simple configuration interface
- Small register configuration space
- Simple interface, can be easily connected to a standard APB bus, or similar
- Minimal setup, with automatic start-up when reset is de-asserted
- On-Chip IO ring compatibility
- Small footprint
- Flip-Chip packaging
- Clocking
- Multiple clocking options with external reference clock or internal clock for debug
- Extensive Test and Debug Features
- Virtual Eye generation
- Loopback Serial and parallel
- Scan
- JTAG, IEEE 1149.1
- Serial Debug
- Embedded TAP controller
- Configurability
- Programmable lane enable/disable
- Choice of macros pre-configured for 1 to 4 lanes
- Low Power
Block Diagram
Technical Specifications
Foundry, Node
28nm 40nm 65nm 22nm
Maturity
Multiple customers have used
Availability
Immediately
Related IPs
- ETHERNET 10G KR PCS IP
- 10G Combo Serdes for USB/PCIe/Ethernet, TSMC 28HPC+, N/S orientation
- 10G Combo Serdes for USB/PCIe/Ethernet, SMIC 14FF, N/S orientation
- High Speed Ethernet Quad 10G to 100G PCS
- 10G to 400G High Speed Channelized Ethernet Controller MAC/PCS/FEC
- Certified USB 5G & 10G, USB2 Hub controller