LPDDR4 is full-featured, easy-to-use, synthesizable design, compatible with LPDDR4 JESD209-4, JESD209-4A, JESD209-4B, JESD209-4C, JESD209-4X and JESD209-4Y (Proposed) specification and DFI-version 4.0 or 5.0 specification Compliant. Through its LPDDR4 compatibility, it provides a simple interface to a wide range of low-cost devices. LPDDR4 IIP is proven in FPGA environment.The host interface of the LPDDR4 can be simpleinterface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol.
LPDDR4 Controller IP
Overview
Key Features
- Supports LPDDR4 protocol standard JESD209-4, JESD209-4A, JESD209-4B, JESD209-4C, JESD209-4X and JESD209-4Y (Proposed) Specification.
- Compliant with DFI version 4.0 or 5.0 Specification.
- Supports up to 16 AXI ports with data width upto 512 bits.
- Supports controllable outstanding transactions for AXI write and read channels
- Supports in port arbitration and multi port arbitration.
- Supports user programmable page policy.
- -> Closed page policy
- -> Open page policy
- Supports Error Checking and correction (ECC).
- Supports retry on ECC error, with retry limit user controllable.
- Supports high clock speeds in ASIC and FPGA.
- Supports low latency for write and read path.
- Supports reordering of transactions for higher performance.
- Supports up to 32 GB device density.
- Supports the X8 and X16 device type.
- Supports on-the-fly in burst lengths.
- Supports Byte mode.
- Supports Single-ended mode.
- Supports Write leveling.
- Supports CA training and DQ Vref training.
- Supports all speed grades as per specification.
- Supports Mode Registers programming.
- Supports Sequential burst type.
- Supports Programmable burst lengths of 16 and 32.
- Supports Multiple Outstanding transaction.
- Supports In-port Arbitration using QoS.
- Supports Write Data Mask operation.
- Supports Data Bus Inversion for Write and Read.
- Supports CRC and ECC for Write and Read Operations.
- Supports Self Refresh and Power Down operation.
- Supports Precharge Command modes.
- Supports 1:4 Controller to DFI PHY frequency ratio.
- Supports Programmable clock frequency operation.
- Fully synthesizable.
- Static synchronous design.
- Positive edge clocking and no internal tri-states.
- Scan test ready.
- Simple interface allows easy connection to Microprocessor/Microcontroller devices.
- Build in self test to test all locations in memory to identify damaged locations
Benefits
- Single Site license option is provided to companies designing in a single site.
- Multi Sites license option is provided to companies designing in multiple sites.
- Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
- Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.
Deliverables
- The LPDDR4 interface is available in Source and netlist products.
- The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
- Easy to use Verilog Test Environment with Verilog Testcases.
- Lint, CDC, Synthesis, Simulation Scripts with waiver files.
- IP-XACT RDL generated address map.
- Firmware code and Linux driver package.
- Documentation contains User s Guide and Release notes.
Technical Specifications
Maturity
Getting used at customer site