DC-DC Converter IP

Compare 86 DC-DC Converter IP from 14 vendors (1 - 10)

Custom Regulated High Capacity Charge Pump
- On-Chip Supply Rail Extension
- Extends the headroom and performance range of other on-chip blocks and components
Coin Battery Boost
- Input Voltage Range: 0.9V to 1.8V
- (single alkaline or Ni-MH battery)
- 10 mA maximum output
- 18 uA quiescent current with no load
3.3V to 1.0V, 3.0A Step-down DC-DC converter
- Supply voltage: 3.3V analog and 1.0V digital
- Adjustable output voltage with trimming: 0.8V÷1.15V (1.0V typical)
- Maximum output current up to 3A
3.3V to 1.8V, 0.7A Step-down DC-DC converter
- Supply voltage: 3.3V analog and 1.0V digital
- Adjustable output voltage with trimming: 1.75V÷2.05V (1.8V typical)
- Output current 0.7A
- Soft start mode
2.0-3.6V to 1.0-1.4V step down DC/DC converter
- UMC 55nm eFlash CMOS technology
- Input Voltage Range: +2.0V to +3.6V
- Current limit detector
Ultra low power DCDC
- PWM mode and PSM mode control
- 2A maximum output current
- Dynamic output voltage scaling
- Spread-spectrum frequency modulation
3.3 - 4.2V to 0 - 200V step-up DC/DC converter
- XFAB XT018
- Input Voltage Range: 3.3V to 4.2V
- Output Voltage: 0 to 200V
3.3 - 4.2V to 0 - minus 100V step-down DC/DC converter
- XFAB XT018
- Input Voltage Range: 3.3V to 4.2V
- Output Voltage: 0 to minus 100V
DC/DC - Fast Response Buck - TSMC CM018MG
- Optimal response, high efficiency DC/DC Buck Regulator
- High output current (200mA)
- Large input voltage range, from 2.4V to 5.5V
- Programmable output voltage range from 1.26V up to 1.57V, with 10mV steps
500mA buck converter - SilTerra 0.18um BCD
- Input voltage: 2.5V to 5.5V
- Configurable output voltage:1.0V to 3.3V (steps of 0.1V)
- Maximum load current: 500mA