MIPI UniPro IP

Compare 30 MIPI UniPro IP from 9 vendors (1 - 10)

Simulation VIP for MIPI UniPro
- Serial and RMMI Interfaces
- Supports Serial and RMMI interfaces (downstream)
- CPort Signal Interface
- Supports CPort signal interface (upstream)
MIPI UniPro Verification IP
- Supports MIPI UniPro specification 1.41,1.6,1.8 and 2.0.
- Support MIPI MPHY specification 3.0,4.1 and 5.0.
- Supports data control at each layer of UniPro Specification for easy debug.
- Supports multiple connections in L4 Layer and L4 segments.
MIPI Unipro Synthesizable Transactor
- Supports MIPI UniPro specification 1.41, 1.6 and 1.8
- Supports MIPI MPHY specification 3.0 and 4.1
- Supports data control at each layer of UniPro Specification for easy debug
- Supports multiple connections in L4 Layer and L4 segments
MIPI UniPro IIP
- Compliant with MIPI UNIPRO specification version 1.6,1.8 and 2.0
- Supports MIPI M-PHY specification 3.0 ,4.1 and 5.0
- Supports multiple connections in L4 Layer and L4 segments
- Supports M-PHY HS data rates HS-Gear1 – Gear5, both A/B modes and PWM
Mipi Unipro Verification IP
- MIPI UniPro VIP is fully compliant with MIPI UniPro Specification 2.0 and MIPI M-PHY Specification 5.0
- Fully supports Transport Layer, Network Layer, Data Link Layer, PHY Adapter Layer and Device Management Entity
- Supports maximum of four Lanes in each direction
- Supports different HS-GEAR or PWM-GEAR in both directions.
Mipi Unipro Verification IP
- MIPI UniPro VIP is fully compliant with MIPI UniPro Specification 2.0 and MIPI M-PHY Specification 5.0
- Fully supports Transport Layer, Network Layer, Data Link Layer, PHY Adapter Layer and Device Management Entity
- Supports maximum of four Lanes in each direction
- Supports different HS-GEAR or PWM-GEAR in both directions.
MIPI UniPro G4 Controller
- Compliant with the MIPI UniPro v1.8 specification
- Supports all host and device configurations for JEDEC UFS and UniPort M
- Supports HS-Gear4 Synopsys M-PHY IP v4.1 and access to attributes
- HS-Gear4 adaptation and advanced granularity capability
MIPI UniPro v2.0 Controller
- Compliant with the MIPI UniPro v2.0 specification
- Supports all host and device configurations for JEDEC UFS and UniPort-M
- Supports HS-Gear5 Synopsys M-PHY IP v5.0 and access to attributes
- HS-Gear5 adaptation and advanced granularity capability
UniPro 1.6 device
- Compliant with MIPI Alliance UniPro Standard version 1.6 specification
- HS-G3 transmission in M-PHY
- Dummy burst for Power Mode change procedure
- Skip symbol insertion and scrambler function
UniPro 1.6 host
- Compliant with MIPI Alliance UniPro Standard version 1.6 specification
- HS-G3 transmission in M-PHY
- Dummy burst for Power Mode change procedure
- Skip symbol insertion and the scrambler function