HDMI IP for SMIC
Welcome to the ultimate HDMI IP for SMIC hub! Explore our vast directory of HDMI IP for SMIC
All offers in
HDMI IP
for SMIC
Filter
Compare
21
HDMI IP
for SMIC
from 5 vendors
(1
-
10)
-
HDMI 2.0 TX PHY 6Gbps in SMIC 28nm PS 1.8V, North/South Poly Orientation
- Support for key HDMI 2.0 features such as 4Kx2K resolution at 60 Hz frame rate, YCbCr 4:2:0 pixel encoding format, TMDS scrambling, High Dynamic Range (HDR), CEC 2.0, and 18.0 Gbps aggregate bandwidth
- Compliant with HDMI 2.0 and HDCP 2.3, 1.2 specification
- Optimized for low power and small area
- Timing hardened blocks enable simplified placement and design closure
-
HDMI 1.4 Rx PHY & Controller IP, Silicon Proven in SMIC 65/55SP
- HDMI version 1.4 compliant transmitter
- Supports DTV from 480i to 1080i/p HD resolution
- Supports 24bit, 30bit and 36bit color depth per pixel
- Integrated cable terminator
-
HDMI 1.4 Tx PHY & Controller IP, Silicon Proven in SMIC 40LL
- HDMI version 1.4 compliant transmitter
- Supports DTV from 480i to 1080i/p HD resolution
- Supports 24bit, 30bit and 36bit color depth per pixel
- Integrated cable terminator
-
HDMI 1.4 Tx PHY & Controller IP, Silicon Proven in SMIC 65/55SP
- HDMI version 1.4 compliant transmitter
- Supports DTV from 480i to 1080i/p HD resolution
- Supports 24bit, 30bit and 36bit color depth per pixel
- Integrated cable terminator
-
HDMI 1.4 Tx PHY & Controller IP, Silicon Proven in SMIC 65/55G
- HDMI version 1.4 compliant transmitter
- Supports DTV from 480i to 1080i/p HD resolution
- Supports 24bit, 30bit and 36bit color depth per pixel
- Integrated cable terminator
-
HDMI 1.4 Transmitter IP in SMIC 55LL
- - Clock range : 25-300MHz
- - Built in Band Gap Reference (BGR), PLL, Serializer
- - PADS cell includes ESD protection circuit
- - Built in termination resistor
-
HDMI 1.4 Transmitter IP in SMIC40LL
- - Clock range : 25-300MHz
- - Built in Band Gap Reference (BGR), PLL, Serializer
- - PADS cell includes ESD protection circuit
- - Built in termination resistor
-
HDMI 1.4 Receiver IP, Single or dual port in SMIC 40LL
- - Clock range : 25-300MHz
- - Built in Low-jitter PLL
- - PADS cell includes ESD protection circuit
- - Built in termination resistor
-
HDMI 2.0 TX PHY 6Gbps in SMIC (28nm)
- Compliant with the latest HDMI 2.0/1.4 and DVI specifications
- Four levels of pre-emphasis for long cable support and clean signals
- Hot plug detect allows changing of cables and components without switching off the entire system
- Support for 5V I/O on all nodes (down to 28-nm nodes)
-
HDMI2.1 Transmitter PHY & Controller
- Area: 0.8874mm2 (1020um x 870um) including IO and ESD
- Note: The area parameters are for reference only. Please refer to the final LEF file for the actual values.
- Compliant with HDMI2.1, HDMI2.0, HDMI1.4 and DVI1.0 specifications
- Up to 12Gbps per data channel