PLL IP for SMIC

Compare 70 PLL IP for SMIC from 12 vendors (1 - 10)

Fractional-N Frequency Synthesizer PLL
- Wide functional range allows all frequencies in a system to be synthesized with one PLL macro
- Input & output frequency ranges greater than 1000:1
High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
Low Voltage, Low Power Fractional-N PLLs
- Low power, suitable for IoT applications
- Good jitter, suitable for clocking digital logic.
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 1.5GHz
General Purpose Fractional-N PLLs
- Low power, suitable for logic clocking applications
- Extremely small die area, using a ring oscillator
- Twelve bits fractional resolution
Fractional-N PLLs for Performance Computing
- Low jitter, suitable for many clocking applications, including high speed digital, ADC, DAC, medium-speed PHY
- Extremely small die area (< 0.005 sq mm), using a ring oscillator
- Output frequency can be from 1 to 400 times the input reference, up to 4GHz
- Reference clock from 10MHz to 500MHz
PLL for TSMC 130nm LP
- Wide range N, M, P integer dividers.
- 40MHz – 600MHz output frequency range.
- Comparable frequency range 8MHz – 50MHz.
- 18pS RMS cycle to cycle jitter at 400MHz.
600MHz General Purpose Clock Multiplier PLL for 180n CMOS
- Wide range N, M, P integer dividers.
- 40MHz – 600MHz output frequency range.
- Compare frequency range 8MHz – 75MHz.
800MHz General Purpose PLL
- Wide range M, P integer dividers.
- 50MHz – 800MHz output frequency range.
- Compare frequency range 8MHz – 32MHz.
4-GHz Jitter-optimized low-power digital PLL
- - Jitter below 10-ps
- - Super small: 90 x 90 microns!
- - Very low power: 15-mW
- - Broad frequency range: 4-GHz
Minimum-area low-power clocking PLL (1st gen)
- - Super small: 80 x 80 microns!
- - Very low power: 12-mW
- - Broad frequency range: 2-GHz
- - Fast lock