MIPI D-PHY CSI-2 RX+ (Receiver) IP in UMC 40ULP

Overview

The MXL-DPHY-CSI-2-RX+ is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI Alliance Specification for D-PHY v2.1, which is backward compatible with MIPI Specification for D-PHY v1.1.
The IP is configured as a MIPI Slave optimized for CSI-2 (Camera Serial Interface) applications. The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for High-Speed data traffic while low power functions are mostly used for control.

Key Features

Consists of 1 Clock lane and 4 Data lanes.
Supports MIPI Alliance Specification for D-PHY Version 2.1
Supports both high speed and low-power modes.
80 Mbps to 1.5 Gbps data rate in high speed mode.
10 Mbps data rate in low-power mode.
Low power dissipation.
Loopback testing and ATB support.
Resistance termination calibrator.

Benefits

Comprehensive embedded DFT features for allowing cost-effective high-volume manufacturing tests
Supports full-speed loopback testability with minimal area overhead for high-volume manufacturing tests
Embedded PLL with compact footprint used for generating high-speed clock during test modes and eliminate the need for an external PLL.
One transmitter is used to test multiple receivers to minimize area overhead
Two different loopback modes allow isolation of faults and defects
Analog test bus (ATB) for sensing internal analog voltages and currents

Block Diagram

Applications

Mobile
Cameras/Sensors
IoT
VR/AR/MR
Consumer electronics
Automotive

Deliverables

Specifications
GDSII
LVS netlist
LEF file
IBIS Model
Verilog Model
Timing Model
Integration Guidelines
RTL
Documentation
One year support

Technical Specifications

Foundry, Node

UMC 40nm

Maturity

Silicon Proven

Availability

Now

TSMC

Silicon Proven: 40nm LP

Request Info