IP Catalog > Foundries > GLOBALFOUNDRIES > Interface IP > Memory Interface IP > SATA IP > SATA PHY IP

SATA PHY IP for GLOBALFOUNDRIES

Welcome to the ultimate SATA PHY IP for GLOBALFOUNDRIES hub! Explore our vast directory of SATA PHY IP for GLOBALFOUNDRIES
All offers in SATA PHY IP for GLOBALFOUNDRIES
Filter
Filter

Login required.

Sign in

Search (5)
Compare 5 SATA PHY IP for GLOBALFOUNDRIES from 4 vendors (1 - 5)
  • SATA PHY
    • Serial ATA II Revision 2.6 compliant
    • Gen1i, Gen1m, Gen2i, Gen2m compliant
    • Gen1x, Gen2x compatible
    • Initialization and power saving modes
    Block Diagram -- SATA PHY
  • SATA 6G PHY in GF (40nm, 28nm)
    • Compliant with SATA/eSATA v3.3, AHCI v1.3 and SATA PIPE v4.3 specifications
    • AMBA 2.0 AHB and AMBA 3 AXI subsystem interfaces
    • AMBA 4 AXI and ACE-Lite bus interfaces
    • Memory data protection and memory address parity protection
  • PCIe 3.0/3.1/USB3.0/SATA3 Combo PHY
    • Standard PHY interface enables multiple IP sources for PCI Express Logical Layer and provides a target interface for PCI Express PHY vendors.
    • Supports 2.5Gb/s only or 2.5Gb/s,5.0Gb/s and 8.0Gb/s serial data transmission rate
    • Utilizes 8-bit, 16-bit or 32- bit parallel interface to transmit and receive PCI Express data
    • Allows integration of high speed components into a single functional block as seen by the endpoint device designer.
  • SATA 3.0 PHY
    • OOB Generation and Detection
    • Elasticity Buffer Optional
    • Alternative Host or Device Power-on Sequence State Machine
    • Speed Reduction Negotiation in Device Mode
  • SATA 6G PHY
    • ? 6-Gbps transmission rate through standard SATA cable
    • ? Spread-spectrum clock (SSC) generation and absorption
    • ? Programmable down-spread (+4,980 ppm through -4,980 ppm)
    • ? Fully clock-forwarded transceiver interface, configurable using soft PMA layer above hard macro PHY
×
Semiconductor IP