HBM2E Controller IP

Overview

Key Features

• Supports HBM2E protocol standard JESD235B and JESD235C with revision 4.10 Specification.
• Compliant with DFI version 4.0 or 5.0 Specification.
• Supports up to 16 AXI ports with data width upto 512 bits.
• Supports controllable outstanding transactions for AXI write and read channels.
• Supports in port arbitration and multi port arbitration.
• Supports user programmable page policy.
• -> Closed page policy
• -> Open page policy
• Supports Error Checking and correction (ECC).
• Supports retry on ECC error, with retry limit user controllable.
• Supports high clock speeds in ASIC and FPGA.
• Supports low latency for write and read path.
• Supports reordering of transactions for higher performance.
• Supports all the HBM2E commands as per the specs.
• Supports burst length of 2 and 4.
• Supports all Interface Groups.
• Supports programmable Read/Write latency timings.
• Supports bank grouping.
• Supports DRAM Clock disabling feature.
• Supports Low power control features.
• Supports Data bit enable/disable feature.
• Supports 8, 16, 32 and 64 banks per channel.
• Supports 1:2 MC to PHY frequency ratio.
• Supports up to 8 channels per stack.
• Supports Extended Addressing.
• Supports Extended Write latency and read latency.
• Supports all mode registers programming.
• Supports Data Bus Inversion (DBI) for write and read.
• Supports legacy mode and pseudo channel mode operation (64 DQ width for pseudo channel mode).
• Supports self-refresh modes.
• Supports channel density of 1GB to 128 GB.
• Supports 128 DQ width + optional ECC pin support/channel.
• Supports ECC.
• Supports Error signaling.
• Supports DFI Read/Write Chip Select.
• Supports write data mask and data strobe features.
• Supports for power down features.
• Supports for input clock stop and frequency change.
• Supports for target row refresh mode.
• Supports for temperature compensated refresh reporting.
• Supports for IEEE standard 1500.
• Fully synthesizable.
• Static synchronous design.
• Positive edge clocking and no internal tri-states.
• Scan test ready.
• Simple interface allows easy connection to microprocessor/microcontroller devices.

Benefits

• Single Site license option is provided to companies designing in a single site.
• Multi Sites license option is provided to companies designing in multiple sites.
• Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
• Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.

Deliverables

• The HBM2E interface is available in Source and netlist products.
• The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
• Easy to use Verilog Test Environment with Verilog Testcases.
• Lint, CDC, Synthesis, Simulation Scripts with waiver files.
• IP-XACT RDL generated address map.
• Firmware code and Linux driver package.
• Documentation contains User s Guide and Release notes.

Technical Specifications