Oscillator IP for SMIC

Compare 36 Oscillator IP for SMIC from 9 vendors (1 - 10)

High Performance Fractional-N RF Frequency Synthesizer PLLs for 5G, WiFi, etc
- Fractional-N digital PLL architecture, using an LC-tank oscillator
RC Oscillator SMIC
- • Start-up Time: Typ 10us
- • Frequency Range: 20KHz – 100MHz
- • Accuracy (Calibrated) Max = ? 5%
- • Current Consumption: Typ 100uA @ 10MHz
4-GHz Jitter-optimized low-power digital PLL
- - Jitter below 10-ps
- - Super small: 90 x 90 microns!
- - Very low power: 15-mW
- - Broad frequency range: 4-GHz
Minimum-area low-power clocking PLL (1st gen)
- - Super small: 80 x 80 microns!
- - Very low power: 12-mW
- - Broad frequency range: 2-GHz
- - Fast lock
OSC - SMIC 55nm Eflash
- Lower than 200nA operating current
OSC - SMIC 55nm Eflash
- Typical frequency of output clock: 32KHz, can generate 16KHz/8KHz/4KHz clock
- Frequency accuracy: (after trimming)
- -4% <= ? <= +4%, temperature range: -20°C~100°C
- -5% <= ? <= +5%, temperature range: -40°C~125°C
OSC - SMIC 55nm Eflash
- Oscillator output frequency19.2MHz and 38.4MHz;
- Accuracy <1% after trimming@27°C;
- Operating junction temperature: -40°C~+25°C~+125°C;
- Size: 0.077mm2.
OSC - SMIC 55nm Eflash
- Frequency output range: 48MHz/50MHz/49.15MHz/45.12MHz
- Accuracy <1% after trimming @ 25°C;
- Accuracy <3.5% after trimming @ -40°C~125°C;
4-GHz Jitter-optimized low-power digital PLL
- Jitter below 10-ps
- Super small: 90 x 90 microns!
- Very low power: 15-mW
RTC Real time Clock With Oscillator Nano Power Series - SMIC 40nm
- Oscillator and nano power real time clock
- Nano power 32 kHz oscillator
- Integrated oscillator load capacitors and bias
- Divided square wave output