PLL IP for Silterra
Welcome to the ultimate PLL IP for Silterra hub! Explore our vast directory of PLL IP for Silterra
All offers in
PLL IP
for Silterra
Filter
Compare
10
PLL IP
for Silterra
from 5 vendors
(1
-
10)
-
General Purpose Fractional-N PLL in GlobalFoundries 22FDX
- Super small: 80 x 80 microns!
- Very low power: 12-mW
- Broad frequency range: 6-GHz
-
Minimum-area low-power clocking PLL (1st Gen)
- - Super small: 220 x 230 microns!
- - Very low power: 36-mW
- - Broad frequency range: 2-GHz
- - Fast lock
-
4-GHz Jitter-optimized low-power digital PLL
- - Jitter below 10-ps
- - Super small: 90 x 90 microns!
- - Very low power: 15-mW
- - Broad frequency range: 4-GHz
-
Minimum-area low-power clocking PLL (1st gen)
- - Super small: 80 x 80 microns!
- - Very low power: 12-mW
- - Broad frequency range: 2-GHz
- - Fast lock
-
Frequency Synthesizer PLL
- A family of High performance, PLL based, Frequency Synthesizers
- Up to 2.1 GHz output frequency
- Digital CMOS processes
- Low power dissipation
-
SilTerra 0.18um 1.8V APLL
- Process: SilTerra 180nm ULL 1P6M process
- Supply voltage: 1.8v±10%
- Current: typical 2.6mA
-
1.5-GHz Jitter-optimized low-power digital PLL
- Jitter below 20-ps
- Super small: 250 x 250 microns!
- Very low power: 36-mW
- Broad frequency range: 1.5-GHz
-
20 to 300 MHz frequency synthesizer
- SilTerra CMOS 0.18 um
- 1V CMOS input logic signal
- Output current digital 3-bit adjustment (from 0.75 mA to 6.5 mA)
- 1.6 Gbps (DDR MODE) switching rates for transmitter
-
PLL general purpose / DDR memory, 50-500Mhz, 4 phases (0/90/180/270)
- 50 to 500Mhz output frequency
- 4 phases 0,90,180 &270 even in bypass mode
- 1P4M layout structure based on 0.18um 1P5M or 1P6M 1.8V logic process
- Single power supply 1.8V±10%, -40/+125°C
-
Audio PLL - Fractional-N ±0.05 ppm accuracy
- Fractional-N PLL : ± 0.05 ppm accuracy
- Eliminates VCXO/DCXO requirements
- 10-40 Mhz input
- Audio clock supports 256*fs & 384*fs