SATA/SAS 3.0 PHY

Overview

With sophisticated architecture and advanced technology, KNiulink SATA/SAS transceiver IP with PMA and PCS layer is designed for low power and high performance application. It is highly configurable and can be tightly integrated with the user logic or SOC resources; it can support SATA protocol with data rate 1.5/3/6Gbps, and SAS protocol with data rate 1.5/3/6/12Gbps.

Key Features

  • Highly customizable PMA configuration (controlled by PCS), X4 per Quad
  • Support SATA data rate 1.5/3/6Gbps
  • Support SAS data rate 1.5/3/6/12Gbps
  • Digitally-control-impedance termination resistors
  • Built-in TX equalization and RX CTLE
  • RX Built-in Decision Feedback Equalization
  • Built-in Eye Opening Monitor
  • PRBS (PRBS-7/PRBS-15/PRBS-23/PRBS-31) generator and checker

Benefits

  • Low Power Consumption
  • Multiple Loop Back
  • Support Non-SSC, center-spread and down-spread SSC
  • Supports SATA OOB signaling
  • Support IEEE 1149.1 and 1149.6(AC JTAG) boundary scan
  • Built-in self-test(BIST) features for production
  • Advanced, built-in diagnostics including on-chip eye monitor
  • Independent QPLL at common for clock flexibility
  • Supports flip-chip package

Applications

  • Hard Disk
  • CD-ROM
  • SSD Controller
  • Storage System

Deliverables

  • GDSII&CDL Netlist
  • Verilog Model
  • LEF Layout Abstract(.LEF)
  • Liberty Timing Models(.lib)
  • Verify Results
  • Specification
  • Datasheet
  • Integration Guideline
  • Evaluation Plan
  • Leading support for package design, SI&PI modeling and production test development

Technical Specifications

Foundry, Node
40/28/22/16/14/12nm
Maturity
Silicon Proven
Availability
Available
×
Semiconductor IP