RTC and PMU Controller on GF 22FDSOI
Overview
SGC22300_01_GF_22FDSOI is a Real Time Clock (RTC) based on the leading SGC21510 solution. Using advanced analog design techniques, to guarantee ultra-low power and ultra-low leakage, it was designed to be the brain of the Power Management Unit (PMU). Controlling the state of each regulator of the PMU, it controls if the regulators are in high, low, ultra-low or adaptive ultra-low power. Additionally, it includes anti-temper mechanisms, wake, reset or shutdown causes, that can be masked, allowing also to configure the effect of a reset. Being specified from TJ = –40°C to 125°C, it also includes ultra-low leakage configuration registers to allow the system architect to save the status bits.
Key Features
- Nano power Real Time Clock (RTC) with 32kHz oscillator
- PMU control: individual regulators enable / disable control in high / low / ultra-low / adaptive ultra-low power
- Ultra-low power adaptive mode (Ludicrous)
- Configurable supply domains isolation support
- Configurable reset and shutdown causes
- Anti-temper mechanisms
- Different wake sources
- 48-bit time counter, 32-bit general-purpose register and 2 alarms
- Ultra-low leakage design
- Fast start-up time
Applications
- Time keeping applications
- Wireless Power devices
- Metering devices
Technical Specifications
Foundry, Node
GF 22FDX
GLOBALFOUNDRIES
Pre-Silicon:
22nm
FDX
Related IPs
- CAN CC, CAN FD, and CAN XL Bus Controller
- xSPI, HyperBus™, and Xccela™ Serial Memory Controller
- PMU - Power Managment Unit on TSMC 40nm ULP
- Enhanced SPI Controller IP- Master/Slave, Parameterized FIFO, AMBA APB / AHB / AXI Bus. Supports eSPI Master & Slave and SPI Master & Slave functions
- APC - Advanced Power Controller on GF 22FDSOI
- PCIe 2.0/ CEI 6G, GF 22FDSOI x4, North/South (vertical) poly orientation