CoreAHBLite is a multi-master implementation of the AHB-Lite bus interconnect (a subset of the AMBA advanced high-performance bus) used to connect subsystem cores to Microsemi's 32-bit ARM processors. CoreAHBLite provides 2 AHB-Lite master interfaces, 16 AHB-Lite slave interfaces plus an optional seventeenth AHB-Lite slave interface in a huge 2 GB memory space (231 bytes), and up to 16 Init/Config master interfaces that can be used to initialize up to 16 FPGA SRAM instances. Each slave can either be enabled or disabled for each master via the configuration GUI (graphical user interface). Bus slaves that are not enabled in the configuration GUI are optimized away during synthesis, and if no slaves are selected for a given master, that master interface will be disabled and optimized away during synthesis, yielding ideal compact implementations in FPGA fabric.
CoreAHBLite is small in size and allows easy connection of IP cores in ARM-based systems on Microsemi FPGAs. CoreAHBLite is small in size and allows easy connection of IP cores in ARM-based systems on Microsemi FPGAs.
AMBA AHB-Lite Bus Interface
Overview
Key Features
- Supports two masters
- Supports up to 16 slaves (up to 17 in one mode, if the huge slave is in use)
- Address space per slave varies from 256 bytes to 256 MB (Huge slave occupies 2 GB.)
- Supports allocation of slave slots to a combined region slave interface in most modes
- Access to any slave slot can be enabled on a per master basis
- Both masters have equal priority (round-robin arbitration scheme)
- Supports remapping feature for master 0 interface
- Fully compatible with ARM Cortex-M1, CoreMP7 and AMBA IP cores
Technical Specifications
Related IPs
- AMBA interface for Actel MIL-STD-1553B Cores
- Advanced Encryption Standard (AES-128) core with AMBA AHB interface
- AMBA APB 3.0 Bus Interface
- AMBA AHB to APB Bus Bridge Core
- Configurable AMBA bus SoC platform
- PCIe 3.0, 2.1, 1.1 Controller supporting Root Port, Endpoint, Dual-mode Configurations, with AMBA AXI User Interface