I2C Slave Serial Interface Controller
The I2C_SLAVE IP Core is a Philips® I2C compliant slave interface controller.
- I2C / I3C
Low-Speed Control Interface IP cores provide the communication, control, monitoring, and management functions required by modern SoCs, microcontrollers, automotive systems, industrial equipment, and embedded platforms. These interfaces enable reliable connectivity between processors, sensors, peripherals, power-management devices, and external subsystems.
This catalog includes IP solutions for widely adopted control and management protocols such as I2C/I3C, SPI/QSPI/xSPI, UART, CAN, CAN FD, CAN XL, LIN, GPIO, IEEE 1588/PTP, MIPI RFFE, PMBus, Smartcard, ARINC 429, MIL-STD-1553, FlexRay, SENT, HDLC, and other specialized interfaces. Compare controller, target, and protocol IP offerings from multiple vendors based on standards compliance, feature sets, safety support, performance, and integration requirements.
I2C Slave Serial Interface Controller
The I2C_SLAVE IP Core is a Philips® I2C compliant slave interface controller.
I2C Master Serial Interface Controller
The I2C_MASTER IP Core is a Philips® I2C compliant serial interface controller capable of driving a standard two-wire bus in sing…
I2C Controller IP – Slave, Parameterized FIFO, AHB Bus
The DB-I2C-S-AHB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via the AMBA 2…
I2C Controller IP – Slave, Parameterized FIFO, APB Bus
The DB-I2C-S-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA 2…
I2C Controller IP – Slave, Parameterized FIFO, AXI Bus
The DB-I2C-S-AXI Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via the AMBA 4…
The DB-I2C-S-SCL-CLK-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via th…
The I2C-SMBUS core implements a serial interface controller for the Inter-Integrated Circuit (I2C) bus and the System Management …
The Serial Peripheral Interface or SPI-bus is a simple 4- wire serial communications interface used by many peripheral chips that…
UART ,is a soft Core of a Universal Asynchronous Receiver/Transmitter (UART) functionally, identical to the TL16C450.
I2C Controller IP – Slave, User Register Interface, No CPU Required
The DB-I2C-S-REG is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs not requiring internal conf…
The ntI2C_M is an I2C-bus multi-master interface controller and provides a cost-effective solution for a wide range of applicatio…
Mil-Std-1553B/AS15531 Interface
The GR1553B core implements the MIL-STD-1553B (Notice 2) data bus protocol, with ability to serve as Bus Controller (BC), Remote …
Quad SPI Flash Memory Controller
The SPI-MEM-CTRL core is an SPI serial NOR and serial NAND flash memory controller, supporting Single, Dual and Quad I/O SPI acce…
Single Channel HDLC Controller
Noesis Technologies ntHDLC single channel High-Level Data Link Controller (HDLC) is a full-duplex transceiver with independent tr…
Full-featured Async/Clocked Serial channel
Full-featured asyn/hdlc serial channel
APB General Purpose IO (w/ interrupt)
The APB GPIO is a configurable module allowing the use of up to 32 scalable I/O lines.
The HSCAN IP is a high speed CAN Transceiver for automotive 12V applications.
I2C Controller (AMBA APB <-> I2C)
The I2C Controller provides access to devices with I2C interface.
GRCAN is a CAN 2.0 IP core that implements an internal CAN controller and an AHB DMA backend.