The eSi-I2C core implements the I2C two-wire protocol.
- I2C / I3C
- Silicon proven in multiple products
- Immediate
Low-Speed Control Interface IP cores provide the communication, control, monitoring, and management functions required by modern SoCs, microcontrollers, automotive systems, industrial equipment, and embedded platforms. These interfaces enable reliable connectivity between processors, sensors, peripherals, power-management devices, and external subsystems.
This catalog includes IP solutions for widely adopted control and management protocols such as I2C/I3C, SPI/QSPI/xSPI, UART, CAN, CAN FD, CAN XL, LIN, GPIO, IEEE 1588/PTP, MIPI RFFE, PMBus, Smartcard, ARINC 429, MIL-STD-1553, FlexRay, SENT, HDLC, and other specialized interfaces. Compare controller, target, and protocol IP offerings from multiple vendors based on standards compliance, feature sets, safety support, performance, and integration requirements.
The eSi-I2C core implements the I2C two-wire protocol.
APB SPI (Serial Peripheral Interface) master and slave
The eSi-SPI core is a Serial Peripheral Interface that can be used to implement full-duplex, synchronous, serial communications b…
APB UART with optional ISO7816-3
The eSi-UART core can be used to implement asynchronous serial communications.
The LINFlexD Controller is a serial communication interface designed for Local Interconnect Network (LIN) applications.
xSPI NOR/NAND Flash & HyperRAM Controller
Emerging high-performance applications demand increasingly fast read throughputs from NOR_Flash/ NAND Flash/ HyperRAM memory devi…
The BRIDGE_UART_I2C IP Core provides a simple and convenient way to interface a standard UART bus to a standard I2C bus.
The DB-SPI-XIP-FLASH-AMBA is a Serial Peripheral Interface (SPI) Controller Verilog IP Core supporting access to Single/Dual/Quad…
I3C Controller IP- Slave, Parameterized FIFO, APB Bus
The DB-I3C-S-APB Controller IP Core interfaces a microprocessor via the AMBA APB Bus to an I3C Bus, compliant to the MIPI I3C – I…
I3C Controller IP – Master, Parameterized FIFO, APB Bus
The DB-I3C-M-APB Controller IP Core interfaces a microprocessor via the AMBA APB Bus to an I3C Bus, compliant to the MIPI I3C – I…
Time Synchronization over Internet Protocol
The ST 2059 core is an FPGA IP core that generates timing and clock signals according to the SMPTE ST 2059 standard defined by th…
I3C Controller IP – Master / Slave, Parameterized FIFO, APB Bus
The DB-I3C-MS-APB Controller IP Core interfaces a microprocessor via the AMBA APB Bus to an I3C Bus, compliant to the MIPI I3C – …
AHB Quad SPI Controller with Execute in Place (XIP)
The Quad Serial Peripheral Interface module either controls a serial data link as a master component, or reacts to a serial data …
The SPI to AHB Lite Bridge IP core is commonly used as a monitor interface to allow external devices to access the internal AHB b…
APB4 General Purpose Input/Output Module
The APB4 GPIO Core is fully parameterised core designed to provide a user-defined number of general purpose, bidirectional IO to …
AHB Octal SPI Controller with PSRAM and XIP Support
The Octal SPI Memory Controller IP core is a serial peripheral interface (SPI) master which controls an external serial device, u…
FlexCAN Controller for CAN 2.0 with CAN-FD
The FlexCAN controller is a configurable, synthesizable core implementing the CAN protocol (ISO 11898-1), CAN with Flexible Data …
AXI Quad SPI Controller with Execute in Place (XIP)
The Ultra High-Speed cache memory is an adaptable, independent, non-coherent cache Intellectual Property (IP) featuring an cache …
SPI Slave Serial Interface Controller
The SPI_SLAVE IP Core is an SPI compliant slave interface controller.
UART Serial Interface Controller
The UART_CONT IP Core is a robust UART-compliant serial interface controller capable of receiving and transmitting bits serially.
SPI Master Serial Interface Controller
The SPI_MASTER IP Core is an SPI compliant serial interface controller capable of driving up to 16 different slave devices in ful…