MIPI I3C Basic Secondary Controller
The I3C-SC core implements a versatile MIPI® Improved Inter Integrated Circuit (I3C) Secondary Controller core compliant with the…
- I2C / I3C
Low-Speed Control Interface IP cores provide the communication, control, monitoring, and management functions required by modern SoCs, microcontrollers, automotive systems, industrial equipment, and embedded platforms. These interfaces enable reliable connectivity between processors, sensors, peripherals, power-management devices, and external subsystems.
This catalog includes IP solutions for widely adopted control and management protocols such as I2C/I3C, SPI/QSPI/xSPI, UART, CAN, CAN FD, CAN XL, LIN, GPIO, IEEE 1588/PTP, MIPI RFFE, PMBus, Smartcard, ARINC 429, MIL-STD-1553, FlexRay, SENT, HDLC, and other specialized interfaces. Compare controller, target, and protocol IP offerings from multiple vendors based on standards compliance, feature sets, safety support, performance, and integration requirements.
MIPI I3C Basic Secondary Controller
The I3C-SC core implements a versatile MIPI® Improved Inter Integrated Circuit (I3C) Secondary Controller core compliant with the…
The vendor has designed FlexRay RTL IP Core, supporting data rate up to 10 Mbps.
A Controller Area Network (CAN) is a serial half duplex and differential two-wired asynchronous communication protocol that allow…
The vendor has designed LIN RTL IP Core, supporting data rate up to 20Kbps.
The IEC7816 Slave Controller IP Core is full-featured, easy-to-use, synthesizable designs that are easily integrated into any SoC…
Octal SPI master is full-featured, easy-to-use, synthesizable design, compatible with standard protocol of Macronix (MX66LM1G45G)…
The FSPI is a fully configurable SINGLE, DUAL, QUAD and OCTAL SPI master/slave device, which allows user to configure polarity an…
Express Serial Peripheral Interface IP Core
eSPI controller is full-featured, easy-to-use, synthesizable design, compatible with standard protocol of standard eSPI specifica…
The MIPI RFFE Slave controller IP is a optimized and technology and PHY agnostic implementation of the MIPI RFFE v.3.1 standard t…
ARINC 429 IP Core implements ARINC 429 standard.
Power Management IC - I3C Basic Interface IP
Power Management IC (PMIC) is designed for DDR5 RDIMM, DDR5 LRDIMM, DDR5 NVDIMM application.
I2C Controller IP – Slave, Parameterized FIFO, AHB Master Interface (I2C2AHB)
The DB-I2C-S-AHB-BRIDGE is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs not requiring intern…
I2C Controller IP – Slave, Parameterized FIFO, AXI Master Interface (I2C2AXI)
The DB-I2C-S-AXI-BRIDGE is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs not requiring intern…
I2C Controller IP – Slave, Parameterized FIFO, APB Master Interface (I2C2APB)
The DB-I2C-S-APB-BRIDGE is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs not requiring intern…
DO-254 compliant MIL-STD-1553B IP core
MIL-STD-1553B IP Core implements MIL-STD-1553B standard and provides single or multi-functional interface between host processor …
Receives video data from Flir's Lepton IR-sensors, Video over SPI (VoSPI)
To transfer the sensor data with minimal software and hardware, FLIR has developed the VoSPI protocol, an SPI based Video Interfa…
Smart card controller core is compliant to ISO 7816 3 specification.
MIPI-I3C Combo Host and Target interface controller IP for Sensor and Peripheral connection
The MIPI I3C (Improved Inter Integrated circuit) is a two wire bidirectional Serial Bus for sensor communication.
I3C Controller IP – Master / Slave, Parameterized FIFO, APB Bus. I3C Basic Specification Design
The DB-I3C-BASIC-MS-APB Controller IP Core interfaces a microprocessor via the AMBA APB Bus to an I3C Bus, compliant to the MIPI …
This is a implementation of a 16550 UART.