NTLab is a vertically integrated microelectronics design center. It has 70+ experienced and qualified engineers.
NTLab specializes in the designing of mixed-signal and RF ICs and Systems-on-Chip. It has a wide range of own silicon-verified IP blocks: processor cores, interfaces, analog and high-frequency PHYs, etc., thus allowing customized design to be fast and predictable. In-company unique combination of competences in digital, analog and RF circuits and embedded software enables NTLab to participate in the projects that require deep research and utilize most sophisticated and advanced techniques: multi-system GPS/GLONASS/Galileo/BeiDou/NavIC(IRNSS)/QZSS/SBAS navigation, RF ID, wireless communications, etc. All designed ICs are provided with test and development tools, as well as with reference software.
NTLab offers a wide range of silicon proven analog/mixed-signal IPs in 0.35µm, 0.25 µm, 0.18 µm, 0.13 µm, 0.09 µm, 65nm, 55nm, 40nm, 28nm, 22 nm CMOS and SiGe BiCMOS processes. These IPs are suitable for devices targeted both consumer and industrial markets.
Most of these IPs have been proven in silicon on the foundries: Samsung, UMC, GlobalFoundries, SMIC, VIS, Tower, X-FAB, iHP, AMS, SilTerra, STMicroelectronics, Winfoundry.
0.6 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level due to mutual compensation of temperature dependence of bip…
The 12-bit 500 MSPS IQ DAC employs a high-performance current steering architecture and provides optional differential current ou…
Bandgap voltage reference (output voltage 0.4 V)
The bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of b…
12-bit 1-channel 44/70/90 MSPS pipeline ADC
180TSMC_ADC_13 is a low-power high-speed 12 bit ADC that employs high-performance differential pipeline architecture.
2 Gbps Rail to Rail LVDS receiver
065TSMC_LVDS_10 is LVDS receiver with rail to rail input range.
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider.
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage.
2 mA LDO voltage regulator (output voltage 1.2 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider.
IP is a low power high resolution RC oscillator nominally operates at 100 MHz output clock from a 1.2 V supply.
IP is a low power high resolution RC oscillator nominally operates at 10 MHz output clock from a 1.2 V supply.
The block consists of voltage detector, power on reset and NOR3 gate.
IP is a low power high resolution RC oscillator nominally operates at 1.024 MHz output clock from a 1.2 V supply.
065TSMC_PoR_02 is a Power-on-Reset (PoR) circuit provides a reset signal to the chip when supply voltage reach required level.
Combined GNSS/TV/FM multi-frequency receiver
NT2024 is a 4-channel RF front end designed to perform a simultaneous reception, conversion, filtering and amplifying of GPS/Gali…
SGC21549_IP007702_GF_22FDX is a digitally controlled RC based oscillator with embedded Physically Unclonable Function (PUF) imple…
065TSMC_OSC_02 is a CMOS inverter of a pierce-type variation with an integrated Crystal (Xtal) oscillator that is optimized in pa…
50 - 800 MHz phase-locked loop
The synthesizer forms clock signal with frequency from 50 to 800 MHz.
Process/Voltage/Temperature Sensor (Supply voltage 2.5V/1.1V)
PVT Detector is a unique solution intended to continuously monitor IC status at several on-die locations.
The NFC transceiver IC is intended for adding NFC functionality to mobile devices and other applications having embedded MCU.
NT1046 is a single-chip RFID reader solution.