10 to 50 MHz crystal oscillator
180TSMC_OSC_04 is a reference frequency generator designed to form a reference signal in the frequency range from 10 to 50MHz.
- TSMC
- 55nm
- GP
- Silicon Proven
NTLab is a vertically integrated microelectronics design center. It has 70+ experienced and qualified engineers.
NTLab specializes in the designing of mixed-signal and RF ICs and Systems-on-Chip. It has a wide range of own silicon-verified IP blocks: processor cores, interfaces, analog and high-frequency PHYs, etc., thus allowing customized design to be fast and predictable. In-company unique combination of competences in digital, analog and RF circuits and embedded software enables NTLab to participate in the projects that require deep research and utilize most sophisticated and advanced techniques: multi-system GPS/GLONASS/Galileo/BeiDou/NavIC(IRNSS)/QZSS/SBAS navigation, RF ID, wireless communications, etc. All designed ICs are provided with test and development tools, as well as with reference software.
NTLab offers a wide range of silicon proven analog/mixed-signal IPs in 0.35µm, 0.25 µm, 0.18 µm, 0.13 µm, 0.09 µm, 65nm, 55nm, 40nm, 28nm, 22 nm CMOS and SiGe BiCMOS processes. These IPs are suitable for devices targeted both consumer and industrial markets.
Most of these IPs have been proven in silicon on the foundries: Samsung, UMC, GlobalFoundries, SMIC, VIS, Tower, X-FAB, iHP, AMS, SilTerra, STMicroelectronics, Winfoundry.
10 to 50 MHz crystal oscillator
180TSMC_OSC_04 is a reference frequency generator designed to form a reference signal in the frequency range from 10 to 50MHz.
0.6V/10, 20uA Reference voltage and current source
055TSMC_RS_02 consists of bandgap voltage reference and two voltage-to-current converters: one of them is based on external resis…
10 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_02 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage.
055TSMC_LVDS_03 is a library including: Transmitter LVDS driver (TX_LVDS); Receiver LVDS driver (RX_LVDS); Reference current/volt…
25 to 1750 MHz quadrature mixer
055_MIX_03 is a quadrature mixer that provides 25 - 1750 MHz operation frequency range without external matching components.
120 to 250 kHz Intermediate frequency amplifier with AGC
055TSMC_IFA_01 is an intermediate frequency amplifier (IFA) designed to amplify and transmit differential signals in the frequenc…
1 mA LDO voltage regulator (output voltage 0.4V…0.9V)
040TSMC_LDO_01 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage.
055TSMC_PA_05 is a block includes a power amplifier (PA), output power adjustment system and supply voltage stabilizer.
1Kbyte EEPROM IP with configuration 64p8w16bit
The block is a nonvolatile electrically erasable programmable read-only memory (EEPROM) with volume 1Kbyte (16(bit per word) x 8(…
Wide band 3.5 GHz -7 GHz low noise PLL synthesizer
055TSMC_PLL_02 is a PLL frequency synthesizer that generates a high-frequency signal in the range from 3.5GHz to 7GHz.
12-bit 4-channel 1MSPS R/2R DAC
The 4-channel 12-bit R/2R DAC designed for generating analog control signals.
180TSMC_LVDS_10 is a library including: Transmitter LVDS driver (TX_LVDS); Receiver LVDS driver (RX_LVDS); Transceiver LVDS drive…
50-800 MHz phase-locked loop frequency synthesizer
055TSMC_PLL_01 is an integer-N phase-locked loop frequency synthesizer (PLL), which produces stable clock signal in range from 50…
The quadrature former block is intended to generate quadrature signal in frequency range 25-1750MHz with phase correction ±4?.The…
UHF RFID tag IC with cryptographic authentication and -15 dBm sensitivity
The chip is intended for use in passive UHF transponder applications.
UHF RFID tag IC with 3.6kBit EEPROM and -19.5dBm sensitivity
ND6001 is intended for use in passive UHF transponder applications.
Process/Voltage/Temperature Sensor (Supply voltage 3.3V/1.2V)
PVT Detector is a unique solution intended to continuously monitor IC status at several on-die locations.
Process/Voltage/Temperature Sensor (Supply voltage 3.3V/0.9V)
PVT Detector is a unique solution intended to continuously monitor IC status at several on-die locations.
Process/Voltage/Temperature Sensor (Supply voltage 3.3V/1.2V)
PVT Detector is a unique solution intended to continuously monitor IC status at several on-die locations.
2.0-3.6V to 1.0-1.4V step down DC/DC converter
055UMC_DCDC_01 is high-efficiency step-down DC-DC switching buck converter targeted for operation from 2.0V to 3.6V input voltage.