Designing with ARM Cortex-M based SoC Achitectures: Part 2 - Some typical applications
Tushar Rastogi and Subbarao Lanka, Cypress Semiconductor
embedded.com (March 31, 2014)
In this second in a two part series, Tushar Rastogi and Subbarao Lanka of Cypress Semiconductor compare the capabilities of a standard microcontroller approach to the design of an embedded application to that of a system on chip approach, using the company’s PSoC architecture.
In this second in a two part series, Tushar Rastogi and Subbarao Lanka of Cypress Semiconductor compare the capabilities of a standard microcontroller approach to the design of an embedded application to that of a system on chip approach, using the company’s PSoC architecture.
To read the full article, click here
Related Semiconductor IP
- Zigbee Transceiver PHY
- Data Flow Architecture IP
- AMBA SPI Controller MRAM Controller
- Ethernet MAC
- Protocol Bridges
Related Articles
- An architecture for designing reusable embedded systems software, Part 2
- Analog switches in D-PHY MIPI dual camera/dual display applications (Part 1 of 2)
- Analog switches in D-PHY MIPI dual camera/dual display applications (Part 2 of 2)
- Designing optimal wireless base station MIMO antennae: Part 2 - A maximum likelihood receiver
Latest Articles
- A Low-Latency ASIC Architecture for Real-Time Line Segment Detection
- BitFair: A 12nm Bit-Serial CNN Accelerator with Learnable Early Termination and Adaptive Bit Ordering for Ultra-Low-Power XR Vision
- A Flexible Sparsity-Aware FPGA Accelerator with Column-Wise Compression for Efficient CNN Inference
- Reducing Instruction-Fetch Energy in RISC-V for Embedded AI Processing via Dynamic and Static Loop Caching
- SPARC: Automated Root-Cause Analysis of Pre-Silicon Power Side-Channel Leakage in the Processor Design Flow