Dealing with clock jitter in embedded DDR2/DDR3 DRAM designs: Part 3
By Scott Schaefer, Micron Technology
Embedded.com (11/25/08, 03:40:00 PM EST)
Clock Jitter and Statistics
As previously discussed in Part 1 and Part 2 in this series, measured DDR2/DDR3 clock jitter values are not absolute, but the specification limits are. This presents a problem: is the measured clock jitter a passing value if it is not violating the absolute specification limit? This is unlikely since clock jitter is a random event and it is not possible to measure the worst-case clock jitter event. So, whether a measured value is passing or failing depends on several factors.
Recall that if the clock jitter specifications are violated, the clock jitter's adverse effect on the input timings can be neutralized by increasing the clock period. This suggests that the clock jitter value itself is not the issue; the issue is how much the input timing is adversely affected by the clock jitter.
Also as previously mentioned, until a statistically sound standard deviation (sigma, s) value for the clock jitter is obtained, the clock jitter investigation is incomplete. A statistically sound standard deviation value depends on two factors: (1) the sample size used to measure the clock jitter; and (2) the system BER target.
When investigating clock jitter statistically, only the negative clock jitter only needs to be looked at. For device functionality concerns, the DRAM is adversely affected by negative clock jitter violations, not positive clock jitter violations.
And when the output timings are evaluated, the positive clock jitter results should mirror the negative clock jitter results. Additionally, since the clock jitter is Gaussian, all the clock jitter values should track each other. Analyzing tJITper and how it is compensated for generally ensures that the other clock jitter specifications will not be an issue.
Embedded.com (11/25/08, 03:40:00 PM EST)
Clock Jitter and Statistics
As previously discussed in Part 1 and Part 2 in this series, measured DDR2/DDR3 clock jitter values are not absolute, but the specification limits are. This presents a problem: is the measured clock jitter a passing value if it is not violating the absolute specification limit? This is unlikely since clock jitter is a random event and it is not possible to measure the worst-case clock jitter event. So, whether a measured value is passing or failing depends on several factors.
Recall that if the clock jitter specifications are violated, the clock jitter's adverse effect on the input timings can be neutralized by increasing the clock period. This suggests that the clock jitter value itself is not the issue; the issue is how much the input timing is adversely affected by the clock jitter.
Also as previously mentioned, until a statistically sound standard deviation (sigma, s) value for the clock jitter is obtained, the clock jitter investigation is incomplete. A statistically sound standard deviation value depends on two factors: (1) the sample size used to measure the clock jitter; and (2) the system BER target.
When investigating clock jitter statistically, only the negative clock jitter only needs to be looked at. For device functionality concerns, the DRAM is adversely affected by negative clock jitter violations, not positive clock jitter violations.
And when the output timings are evaluated, the positive clock jitter results should mirror the negative clock jitter results. Additionally, since the clock jitter is Gaussian, all the clock jitter values should track each other. Analyzing tJITper and how it is compensated for generally ensures that the other clock jitter specifications will not be an issue.
To read the full article, click here
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related Articles
- Dealing with clock jitter in embedded DDR2/DDR3 DRAM designs: Part 1
- Emerging Trends and Challenges in Embedded System Design
- New Embedded DRAM Solutions for High-Performance SoCs
- Speed with flexible design critical to embedded DRAM for SoCs
Latest Articles
- An Agentic Python Framework for LLM-Driven UVM Testbench Synthesis with Closed-Loop Compiler Feedback
- Reconfiguring System-Level Protection Through Bounded Delegation in RISC-V MCUs
- SkipLane: Write-Once, Conflict-Free Accumulation for Zero-Skipping CNN Engines on FPGAs
- Priority-Aware Deficit Round Robin for AXI4 Bandwidth Fairness in ASAP-7nm Process
- Atik: A Shared-Mesh Transformer Accelerator for RISC-V