PLL DLL IP Listing

Open NAND Flash Interface (ONFI) for NAND Flash Memory chips is an open standard.

• Single-Protocol PHY

MSquare offers a silicon-proven ONFI 5.0 PHY IP that supports all modes of the Open NAND Flash Interface (ONFI) 5.0 specification.

• Single-Protocol PHY

The LDO is capable of outputting 1.2V voltage with maximum power of 100mA and low drop out voltage of less than 200mV.

• LDO Voltage Regulator
• Silicon Proven
• Now

The AR25F01 is a mass-production proven cap-less LDO IP.

• LDO Voltage Regulator
• Mass Production
• Now

DisplayPort and HDMI Transmit technologies are complex mixed signal designs which require both high performance analog design (eq…

• Displayport
• Now

IGAHBMZ03A is a High Bandwidth Memory 4 Physical Layer (HBM4 PHY) that is compliant with JEDEC HBM4 DRAM Specification JESD270-4.

• PHY
• TSMC
• 3nm
• N3FFP
• Silicon Proven

MSquare's LPDDR4X PHY is a transceiver physical layer IP interface solution designed for ASICs and SOCs.

• Single-Protocol PHY

This datasheet describes the HBM (High Bandwidth Memory) PHY IP, which could be integrated with HBM memory controller to provide …

• TSMC
• 7nm
• N7FF
• Silicon Proven

This datasheet describes GUC HBM (High Bandwidth Memory) PHY IP, which could be integrated with HBM memory controller to provide …

• TSMC
• 5nm
• N5FF
• Silicon Proven

IGAHBMX03A is a HBM3 (High Bandwidth Memory) PHY IP compliant to the JEDEC HBM3 DRAM Specification Rev 0.95.

• TSMC
• 7nm
• N7FF

The ONFI multi-PHY is a versatile solution that accommodates ONFI4.0 to ONFI6.0 NAND flash interfaces, offering impressive speeds…

• Single-Protocol PHY

The LPDDR4X multi-PHY supports both LPDDR4 and LPDDR4X memory interfaces at speed up to 4267Mbps, making it an ideal solution for…

• Single-Protocol PHY

M31 LPDDR4X multi-PHY support DDR4, LPDDR4, and LPDDR4X up to 4267Mbps.

• Single-Protocol PHY

This datasheet describes GUC’s HBM (High Bandwidth Memory) PHY IP, which can be integrated with HBM memory controller to provide …

• TSMC
• 16nm
• Silicon Proven

The ONFI 3.2 compliant NAND Flash Controller IP Core is a full featured, easy to use, a synthesizable design that is easily integ…

• NAND Flash

The WEAADC12BHS22G is a 12-bit Successive Approximation Analog-to-Digital Converter (ADC) that supports both single-ended and dif…

• 12 Bit
• GlobalFoundries
• 22nm
• FDX

The HDMI receiver PHY (Physical layer), a single-port IP core, complies with all the specifications of HDMI 1.4.

• HDMI
• In Production
• Immediate
• HDMI 1.4 Receiver, HDCP rev…

The single-port IP core, HDMI receiver PHY (Physical layer), completely complies with HDMI 1.4's specifications.

• SMIC
• 55nm
• LL
• In Production

The HDMI receiver PHY (Physical layer), a single-port IP core, fully conforms with HDMI 1.4's requirements.

• GlobalFoundries
• 55nm
• LPe
• In Production

IP core for physical layer HDMI transmitters that fully complies with HDMI 1.4 specifications The HDMI transmitter PHY provides a…

• HDMI
• In Production
• Immediate
• HDMI 1.4 Transmitter