5-60V Input Buck Regulator - Globalfoundries 180nm BCD
The OT1152 is an 80mA CMOS buck regulator designed for use with high input voltages and logic level output voltages..
130GF_LDO_03 is a Power management unit, designed to supply integrated circuits with stable and precise voltage.
6GHz-12.5GHz PLL in GF 22nm FDX
Ultra-low jitter, low-power ring-oscillator-based PLL- 6GHz-12.5GHz in GF 22nm FDX
BLE Advertising Transmitter RF Frontend
130GF_BLE_01 is a small area transmitter with output frequency range 2.4…2.48GHz.
High-Speed Transimpedance Amplifier
Up to 100 Gbps NRZ on GF Fotonix™, silicon-proven, GDS ready.
Up to 100 Gbps NRZ/PAM4 on GF Fotonix™, silicon-proven, GDS ready
UHF RFID EPC Gen2 physical interface
130GF _G2PHY_02 is the IP intended for use in passive UHF transponder applications.
130GF_PMU_02 is a Power Management Unit (PMU) block designed to supply embedded integrated circuits with stable and precise volta…
1KByte EEPROM IP with configuration 66p16w8bit
130GF_EEPROM_04 is a nonvolatile electrically erasable programmable read-only memory (EEPROM) with volume 1056 Byte (8(bit per wo…
NVM OTP in GF (180nm, 130nm, 65nm, 55nm, 40nm, 28nm, 22nm, 12nm)
Synopsys Non-Volatile Memory (NVM) IP provides reprogrammable NVM supporting up to 1 million bits (1Mbit) configurations in stand…
Synopsys Non-Volatile Memory (NVM) IP provides reprogrammable NVM supporting up to 1 million bits (1Mbit) configurations in stand…
SATA 6G PHY in GF (40nm, 28nm)
The Synopsys IP solution for Serial ATA (SATA) provides the necessary logic to implement and verify designs using the SATA interf…
The Synopsys USB-C™ 3.0 and USB 3.0 femtoPHY IP provide designers with a physical (PHY) layer IP solution for low-power mobile an…
USB 2.0 picoPHY in GF (40nm, 28nm)
The Synopsys USB 2.0 picoPHY provides designers with a physical (PHY) layer IP solution, designed for low power mobile and consum…
The Synopsys USB 2.0 nanoPHY provides designers with a Physical Layer (PHY) IP solution, designed for low-power mobile and consum…
USB 2.0 femtoPHY in GF (28nm, 22nm, 12nm)
The Synopsys IP USB 2.0 femtoPHY provides designers with a physical (PHY) layer IP solution for low-power mobile and consumer app…
USB 2.0 femtoPHY in GF (22nm) for Automotive Grade 1
The Synopsys IP USB 2.0 femtoPHY provides designers with a physical (PHY) layer IP solution for low-power mobile and consumer app…
2048bits EEPROM with configuration 16p8w16bit
130GF_EEPROM_05 is a nonvolatile electrically erasable programmable read-only memory (EEPROM) with volume 2048bit, which is organ…
Ultra-Low-Power Temperature/Voltage Monitor in GF 22FDX
The ODT-TVM-ULP-001C-GF22FDX is an ultra-low power temperature and voltage monitor designed in a 22nm process.
Low dropout regulator (LDO), 25mA output current on GF 22FDX
The ODT-LDO-IC-25M-GF22FDX is a low dropout (LDO), linear regulator for integration in a SoC.