Vendor: NTLab Category: Power Management Unit

NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)

130GF_PMU_02 is a Power Management Unit (PMU) block designed to supply embedded integrated circuits with stable and precise volta…

GlobalFoundries 130nm BCD Pre-Silicon View all specifications

Overview

130GF_PMU_02 is a Power Management Unit (PMU) block designed to supply embedded integrated circuits with stable and precise voltage and current. IP should derive it’s operating power from rectifier or external DC voltage source (Battery assisted operation).
PMU block consists of:
- 2 identical low drop out voltage regulators (LDO);
- Voltage and current reference source;
- Power-On-Reset module (POR) for each voltage regulator;
- Power-OK input voltage monitoring with 4 threshold (POK);
- 2 MHz oscillator.

Key features

  • GF 130nm Embedded EEPROM technology process
  • Reverse current protection
  • Two low drop out voltage regulators (capless solution)
  • Embedded Power-On-Reset module
  • Embedded 2MHz oscillator
  • Low-noise bandgap reference and low-noise current reference
  • Input voltage monitor with 4 thresholds
  • Battery assisted operation

Block Diagram

130GF_PMU_02 block diagram

Applications

  • Access control systems
  • RFID systems, smart cards
  • Electronic devices with battery power
  • Chip serial ID and chip safety

What’s Included?

  • Schematic or NetList
  • Abstract view (.lef and .lib files)
  • Layout (optional)
  • Verilog behavior model
  • Extracted view (optional)
  • GDSII
  • DRC, LVS, antenna report
  • Test bench with saved configurations (optional)
  • Documentation

Silicon Options

Foundry Node Process Maturity
GlobalFoundries 130nm BCD Pre-Silicon

Specifications

Identity

Part Number
130GF_PMU_02
Vendor
NTLab
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

NTLab
HQ: Lithuania

Semiconductor IP FAQ

What is NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)?

NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency) is a Power Management Unit IP core from NTLab listed on Semi IP Hub. It is listed with support for globalfoundries Pre-Silicon.

How should engineers evaluate this Power Management Unit?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Power Management Unit IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP