Controller Area Networks, CAN 2.0B Bus Controller IP Core
CAN is part of HCL’s IP offerings and supports Version 2.0, PART B specification released by Bosch.
- CAN / CAN-FD / CAN-XL
- Now
- AMBA AHB
Controller Area Networks, CAN 2.0B Bus Controller IP Core
CAN is part of HCL’s IP offerings and supports Version 2.0, PART B specification released by Bosch.
The AHB to APB bridge is an AHB slave, providing an interface between the highspeed AHB and the low-power APB.
Watchdog Timer IP is used to monitor status of Host.
I2C Dual mode IP ( master and slave mode) with APB interface to support the standard I2C Bus Protocol and APB5 Interface on the A…
CSI2 TX; Camera Serial Interface, MIPI Compliant
CSI2 – TX is part of HCL’s MIPI® compliant offerings.
The HCLTech_gf40_gpio_i2c_i3c_bi_3p3v IP is a versatile and robust I3C IO interface designed to facilitate efficient communicatio…
HCLTech offers a low drop-out (LDO) voltage regulator that has been designed in a 40nm GF technology.
BGR + V-I Bandgap Reference Circuit
HCLTech offers IP Bandgap (BGR) bgr_1p2_t40_v1 generates precision reference voltage (0.4V ~ 1.2V) and current reference (1.005µA…
HCLTech offers IP RC Oscillator core consists of digital to analog current converter [IDAC], Ring Oscillator and Level shifter.
HCLTech offers SAR ADC 10bit hcl_saradc_10bit_5msps_t40_v1 is a general-purpose analog to digital converter (ADC).
HCLTech offers IP Temperature Sensor hcl_tempsense_t40_v1 (temperature sensor IP) utilizes a Proportional to Absolute Temperature…
HCLTech offers IP POR hcl_por_t40_v1 circuit provides a reset signal to the chip when supply ramps up so that the chip always sta…
HCLTech offers A low drop-out (LDO) voltage regulator has been designed in a 40nm tsmc technology.
HCLTech Offers IP Process Monitor IP (hcl_procmon_t40_v2) consists of three ring oscillators namely RVT Ring Oscillator, Thick ox…
CSI2 RX; Camera Serial Interface, MIPI Compliant
The CSI2 Receiver IP Interfaces between Camera module which has the transmitter and the application processor.
The LVDS_RX is CMOS differential line receivers designed for applications requiring ultra low power dissipation, low noise, and h…
The LVDS_TX is CMOS differential line transmitter designed for applications requiring ultra low power dissipation, low noise, and…
The Regulator is designed to power the devices that require currents upto 60mA.
The Regulator is designed to power the devices that require currents upto 1mA.
The designated IP is a power on reset circuit intended for integration into 130nm CMOS technology System on Chips.