Vendor: HCL Technologies Category: MIPI

CSI2 RX; Camera Serial Interface, MIPI Compliant

The CSI2 Receiver IP Interfaces between Camera module which has the transmitter and the application processor.

Overview

The CSI2 Receiver IP Interfaces between Camera module which has the transmitter and the application processor. The CSI2 Receiver IP is fully compliant with the MIPI Alliance Specification for Camera Serial Interface 2 (CSI-2) Version 1.1 and D-PHY Version 1.1. The CSI2 Receiver IP supports flexible pixel interface where based on the data format the pixels are transferred to the application interface.

Key features

  • Supports up to 4-Data lanes
  • The Data lanes can be programmed to operate at 1 or 2 or 3 or 4 lanes
  • Each Data lane supports up to 1.5Gbps at High Speed mode and up to 20-MHz at Low power mode
  • Supports 4-virtual channel
  • Supports Camera control Interface for controlling the CSI2 Transmitter
    • Two wire, Bi directional and half duplex interface (SCLK, SDA), Supports 400KHz and 7-bit Slave addressing
  • Supports ECC -single bit Error correction and double bit error detection for packet headers
  • Supports CRC error checking for the payload
  • Supports the following error handling mechanism
    • D-PHY Layer Errors
    • ECC and CRC Errors
    • Frame Sync Errors
    • Invalid Data format
  • Supports High speed data, Ultra Low power (Escape mode) control and Low power data modes of operations

Block Diagram

What’s Included?

  • Source Code – Verilog HDL
  • Verification Environment
  • Synthesis Scripts
  • Timing Constraints
  • User Manual

Specifications

Identity

Part Number
HCL CSI RX IP
Vendor
HCL Technologies
Type
Silicon IP

Provider

Learn more about MIPI IP core

Casting a wide safety net through post processing Checking

In this paper, we explain how we adopted the post processing method to make sure we check for signatures that are expected are present in the log files. This acted as a safety net when engineers made inadvertent mistakes and introduced issues in the code base.

Low Power Design in SoC Using Arm IP

This paper discusses about the low power IP components from ARM can help one to realize the low power features in the SoC. It should be noted that this paper does not discuss about the low power concepts or design techniques. Rather, it focuses on the implementation approaches using ARM low power IP.

Frequently asked questions about MIPI IP cores

What is CSI2 RX; Camera Serial Interface, MIPI Compliant?

CSI2 RX; Camera Serial Interface, MIPI Compliant is a MIPI IP core from HCL Technologies listed on Semi IP Hub.

How should engineers evaluate this MIPI?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this MIPI IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP