Low-Speed Control Interface IP cores provide the communication, control, monitoring, and management functions required by modern SoCs, microcontrollers, automotive systems, industrial equipment, and embedded platforms. These interfaces enable reliable connectivity between processors, sensors, peripherals, power-management devices, and external subsystems.
This catalog includes IP solutions for widely adopted control and management protocols such as I2C/I3C, SPI/QSPI/xSPI, UART, CAN, CAN FD, CAN XL, LIN, GPIO, IEEE 1588/PTP, MIPI RFFE, PMBus, Smartcard, ARINC 429, MIL-STD-1553, FlexRay, SENT, HDLC, and other specialized interfaces. Compare controller, target, and protocol IP offerings from multiple vendors based on standards compliance, feature sets, safety support, performance, and integration requirements.
AHB Quad SPI Controller with Execute in Place (XIP)
The Quad Serial Peripheral Interface module either controls a serial data link as a master component, or reacts to a serial data …
The SPI to AHB Lite Bridge IP core is commonly used as a monitor interface to allow external devices to access the internal AHB b…
APB4 General Purpose Input/Output Module
The APB4 GPIO Core is fully parameterised core designed to provide a user-defined number of general purpose, bidirectional IO to …
AHB Octal SPI Controller with PSRAM and XIP Support
The Octal SPI Memory Controller IP core is a serial peripheral interface (SPI) master which controls an external serial device, u…
FlexCAN Controller for CAN 2.0 with CAN-FD
The FlexCAN controller is a configurable, synthesizable core implementing the CAN protocol (ISO 11898-1), CAN with Flexible Data …
AXI Quad SPI Controller with Execute in Place (XIP)
The Ultra High-Speed cache memory is an adaptable, independent, non-coherent cache Intellectual Property (IP) featuring an cache …
SPI Slave Serial Interface Controller
The SPI_SLAVE IP Core is an SPI compliant slave interface controller.
SPI Master Serial Interface Controller
The SPI_MASTER IP Core is an SPI compliant serial interface controller capable of driving up to 16 different slave devices in ful…
I2C Slave Serial Interface Controller
The I2C_SLAVE IP Core is a Philips® I2C compliant slave interface controller.
I2C Controller IP – Slave, Parameterized FIFO, AHB Bus
The DB-I2C-S-AHB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via the AMBA 2…
I2C Controller IP – Slave, Parameterized FIFO, APB Bus
The DB-I2C-S-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA 2…
I2C Controller IP – Slave, Parameterized FIFO, AXI Bus
The DB-I2C-S-AXI Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via the AMBA 4…
The DB-I2C-S-SCL-CLK-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high-performance microprocessor via th…
The I2C-SMBUS core implements a serial interface controller for the Inter-Integrated Circuit (I2C) bus and the System Management …
I2C Controller IP – Slave, User Register Interface, No CPU Required
The DB-I2C-S-REG is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs not requiring internal conf…
The ntI2C_M is an I2C-bus multi-master interface controller and provides a cost-effective solution for a wide range of applicatio…
Mil-Std-1553B/AS15531 Interface
The GR1553B core implements the MIL-STD-1553B (Notice 2) data bus protocol, with ability to serve as Bus Controller (BC), Remote …
Quad SPI Flash Memory Controller
The SPI-MEM-CTRL core is an SPI serial NOR and serial NAND flash memory controller, supporting Single, Dual and Quad I/O SPI acce…
Single Channel HDLC Controller
Noesis Technologies ntHDLC single channel High-Level Data Link Controller (HDLC) is a full-duplex transceiver with independent tr…
APB General Purpose IO (w/ interrupt)
The APB GPIO is a configurable module allowing the use of up to 32 scalable I/O lines.