10-bit 1-channel 1 MSPS SAR ADC
250iHP_ADC_09 is 10-bit 1 MSPS ADC employs high-performance single ended successive approximation architecture with embedded 8-in…
- 10 Bit
NTLab is a vertically integrated microelectronics design center. It has 70+ experienced and qualified engineers.
NTLab specializes in the designing of mixed-signal and RF ICs and Systems-on-Chip. It has a wide range of own silicon-verified IP blocks: processor cores, interfaces, analog and high-frequency PHYs, etc., thus allowing customized design to be fast and predictable. In-company unique combination of competences in digital, analog and RF circuits and embedded software enables NTLab to participate in the projects that require deep research and utilize most sophisticated and advanced techniques: multi-system GPS/GLONASS/Galileo/BeiDou/NavIC(IRNSS)/QZSS/SBAS navigation, RF ID, wireless communications, etc. All designed ICs are provided with test and development tools, as well as with reference software.
NTLab offers a wide range of silicon proven analog/mixed-signal IPs in 0.35µm, 0.25 µm, 0.18 µm, 0.13 µm, 0.09 µm, 65nm, 55nm, 40nm, 28nm, 22 nm CMOS and SiGe BiCMOS processes. These IPs are suitable for devices targeted both consumer and industrial markets.
Most of these IPs have been proven in silicon on the foundries: Samsung, UMC, GlobalFoundries, SMIC, VIS, Tower, X-FAB, iHP, AMS, SilTerra, STMicroelectronics, Winfoundry.
10-bit 1-channel 1 MSPS SAR ADC
250iHP_ADC_09 is 10-bit 1 MSPS ADC employs high-performance single ended successive approximation architecture with embedded 8-in…
14-bit 2-channel 40-500 MSPS current DAC
065STM_DAC_01 is a two-channel high-speed 14-bit digital-to-analog converter (DAC) designed to convert a digital signal into an a…
22.4 to 44.8 MHz 4th order low pass filter
Low-pass filter (LPF) is the 4th order Butterworth filter with cut-off frequency adjustment.
1.16 to 1.26 and 1.56 to 1.61 GHz low noise amplifier with 27.5dB gain
350AMS_LNA_04 is a common receiver front-end device which is used to provide impedance matching to off-chip circuits and to perfo…
1692 to 1973 MHz Voltage Controlled Oscillator
Voltage-controlled oscillator (VCO) is the generator that can be tuned over a wide range of frequencies by applying a control vol…
1 to 30 MHz Intermediate-Frequency Amplifier with Wide Gain Range
IFA consists of 3 stages amplifier with tunable gain, AGC system, linear buffer for analog output and an analog-digital converter…
1.013 to 1.217 GHz phase-locked loop
Frequency synthesizer built on PLL by dividing the integer coefficients.
1.68 to 1.917 GHz Phase-Locked Loop
Frequency synthesizer built on PLL by dividing the integer coefficients.
250iHP_PMU_03 is power management system, which divided in primary unit and up to three secondary units.
250iHP_PGA_01 is a programmable gain amplifier (PGA) with low-pass filter (LPF).
Quadrature former 1.25-1.9 GHz
Quadrature former (QF) generate differential output signals with phase shift of 90° for each of 4 channel, coherent to input sign…
-40 to +125 ºС Temperature & Voltage Sensor (Voltage measurement 2.0V - 3.0V)
T&V Sensor is a unique solution intended to continuously monitor IC status at several on-die locations.
250iHP_PMU_05 is power management system, which consists of two parts – Bandgap and 4 LDOs.
PMU IP includes following components: Bandgap reference voltage source and reference current sources.
10-bit 1-channel constant power DAC
10-bit constant power DAC employs a current steering DAC architecture with control loop, which adjusts DAC input code to keep pow…
Power Management Unit (2.3 - 3.0V output voltage, load current 150mA)
130iHP_PMU_02 is designed to form stabilized voltage with overcurrent indication (bit OVC).
1.8-3.6V to 2.7-3.0V step up DC/DC converter
130iHP_DCDC_01 is a high-performance step up DC/DC converter designed to operate with 1.8-3.6V input voltage.
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC).
130iHP_PA_03 is based on AB class power amplifier with a preamplifier.
12-bit 1-channel 1 to 10 kSPS SAR ADC
130iHP_ADC_01 employs high-performance successive approximation architecture.