24.84 MHz Phase-frequency detector with charge pump (input amplitude 150…210 mV)
180TSMC_PFD_04 is a phase-frequency detector (PFD) forms control signal for VCO tuning.
- TSMC
- 180nm
- BCDG2
- Silicon Proven
NTLab is a vertically integrated microelectronics design center. It has 70+ experienced and qualified engineers.
NTLab specializes in the designing of mixed-signal and RF ICs and Systems-on-Chip. It has a wide range of own silicon-verified IP blocks: processor cores, interfaces, analog and high-frequency PHYs, etc., thus allowing customized design to be fast and predictable. In-company unique combination of competences in digital, analog and RF circuits and embedded software enables NTLab to participate in the projects that require deep research and utilize most sophisticated and advanced techniques: multi-system GPS/GLONASS/Galileo/BeiDou/NavIC(IRNSS)/QZSS/SBAS navigation, RF ID, wireless communications, etc. All designed ICs are provided with test and development tools, as well as with reference software.
NTLab offers a wide range of silicon proven analog/mixed-signal IPs in 0.35µm, 0.25 µm, 0.18 µm, 0.13 µm, 0.09 µm, 65nm, 55nm, 40nm, 28nm, 22 nm CMOS and SiGe BiCMOS processes. These IPs are suitable for devices targeted both consumer and industrial markets.
Most of these IPs have been proven in silicon on the foundries: Samsung, UMC, GlobalFoundries, SMIC, VIS, Tower, X-FAB, iHP, AMS, SilTerra, STMicroelectronics, Winfoundry.
24.84 MHz Phase-frequency detector with charge pump (input amplitude 150…210 mV)
180TSMC_PFD_04 is a phase-frequency detector (PFD) forms control signal for VCO tuning.
0.1 to 25 MHz Phase-frequency detector with charge pump
180TSMC_PFD_03 is a phase-frequency detector (PFD) forms control signal for VCO tuning.
6.5 to 23 MHz 3rd order low pass filter
Low pass filter (3rd order Chebyshev filter) is based on the gyrators with cut-off frequency adjustment in wide range (6.5…23 MHz…
1550 to 1610 MHz low-noise amplifier
180TSMC_LNA_08 a low noise amplifier (LNA) is usually used as the first stage of receivers and is characterized by low noise figu…
PLL lock detector with low current consumption and high accuracy
The lock detector monitors the current status of PLL by comparing the phase difference of VCO divided signal and reference oscill…
PLL lock detector with low current consumption and high accuracy
The lock detector monitors the current status of PLL by comparing the phase difference of VCO divided signal and reference oscill…
Intermediate frequency amplifier with wide gain range
Intermediate-frequency amplifier consists of 3-stages amplifier with tunable gain, AGC system, linear output buffer for different…
Active antenna detector with load current limit
The antenna detector supplies an active antenna and is able to detect both open and short circuits.
NFC wireless interface supporting ISO14443 A and B with EEPROM on SMIC 180nm
The IP block provides the physical layer implementation of ISO 14443 interface.
NFC wireless interface supporting ISO14443 A and B on SMIC 180nm
The IP block provides the physical layer implementation of ISO 14443 interface.
Up to +/-90V low power high-voltage single-ended amplifier
180XFAB_OpAmp_01 is two-stage amplifier.
3.3 - 4.2V to -3.7V step-down DC/DC converter
180XFAB_DCDC_05 is capable to generate -4.2V ÷ -3.3V (-3.7V typical value) voltage and can maintain 50uA load for -3.7V output.
14-bit 1-channel 40 to 160 MSPS pipeline ADC
065STM_ADC_01 is a high-speed 1-channel 14-bit ADC based on a pipelined architecture.
12-bit 1-channel 10 to 40 MSPS SAR ADC
055TSMC_ADC_12 is a 12-bit 1-channel SAR ADC with sample rate from 10 to 40 MSPS that operates with 1V peak-to-peak input signal.
3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter
180XFAB_DCDC_04 is a DC/DC step-down voltage converter that generates -200V output voltage from 3.3V to 4.2V.
3.3 - 4.2V to 0 - 200V step-up DC/DC converter
180XFAB_DCDC_03 is a DC/DC step-up voltage converter that generates +200V output voltage from 3.3V to 4.2V.
3.3 - 4.2V to 0 - minus 100V step-down DC/DC converter
180XFAB_DCDC_02 is a DC/DC step-down voltage converter that generates -100V output voltage from 3.3V to 4.2V power supply.
3.3-4.2V to 0-100V step-up DC/DC converter
180XFAB_DCDC_01 is a DC/DC step-up voltage converter that generates +100V output voltage from 3.3V to 4.2V power supply.
-40 to +125 º? Temperature & Voltage Sensor (Voltage measurement 2.0V - 3.0V)
T&V Sensor is a unique solution intended to continuously monitor IC status at several on-die locations.
10-bit 1-channel constant power DAC
10-bit constant power DAC employs a current steering DAC architecture with control loop, which adjusts DAC input code to keep pow…