I2C / I3C IP cores enable standards-based low-speed control and peripheral communication in modern SoC and ASIC designs.
These IP cores support low-speed serial control and sensor communication, including modern I3C enhancements for bandwidth, in-band interrupt support, and dynamic addressing, helping designers integrate interoperable control links across embedded, automotive, industrial, and connectivity-focused systems
This catalog allows you to compare I2C / I3C IP cores from leading vendors based on feature set, latency, power consumption, and process node compatibility.
Whether you are designing sensor hubs, mobile platforms, embedded controllers, or automotive electronics, you can find the right I2C / I3C IP for your application.
MIPI I3C Slave v1.1 Controller IP enables efficient data flow for sensor integration.
As Sensor data rate increases, there is a necessity to have control information flowing to and from sensors at an efficient data …
I3C interface is a fast, low cost, low power, two wire digital interface for sensors in mobile wireless products, compliant with …
SMBUS & PMBUS Master/Slave controller
The DPSMBUS is a fully-featured module based on the I2C protocol, which supports SMBus and PMBus functionalities.
I2C Master / Slave Controller with FIFO (AXI & AXI-Lite Bus)
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmissio…
I2C Bus Master / Slave Controller Interface with FIFO
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmissio…
Time Sensitive Networking (TSN) IIC(R) Plugfest Application core
The TSN Industrial Internet Consortium(R) (IIC) Plugfest Application is a companion core for the TSN IP cores from NetTimeLogic.
IQonIC Works I3C Slave Core provides a slave interface for the following protocols: - I2C standard mode (100kbps) - I2C fast mode…
The proliferation of sensors in mobile wireless and mobile-influenced products has created significant design challenges.
The proliferation of sensors in mobile wireless and mobile-influenced products has created significant design challenges.
I2C Bus Interface Slave -Base version
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmissio…
Slave I2C bus controller with FIFO
The DI2CS core provides an interface between a microprocessor / microcontroller and I2C bus.
The I2C is a two-wire, bi-directional serial bus, that provides a simple and efficient method of short distance data transmission…
The AVSBus Verification IP provides an effective and efficient way to verify the components interfacing with AVSBus interface of …
The MIPI-I3C VIP provides configurable option to select I3C master/secondary master/slave based on the MIPI I3C DUT function as p…
APB I2C Master/Slave Controller
The I2C Interface provides full support for the two-wire I2C synchronous serial interface, compatible with the ACCESS.
SVID Verification IP provides an smart way to verify the SVID bi-directional two-wire bus.
SMBus Verification IP provides an smart way to verify the SMBus bi-directional two-wire bus.
MIPI I3C Verification IP provides a smart way to verify the MIPI I3C bi-directional two-wire bus.
I2C Verification IP provides an smart way to verify the I2C bi-directional two-wire bus.
AVSBus Verification IP provides a smart way to verify the AVSBus (Adaptive Voltage Scaling) component of a SOC or a ASIC.