What is 802.11ac, anyway?
Jackson Corson
EDN (September 09, 2014)
IEEE 802.11ac has a lot to add to the wireless family. It brings a significant improvement over 802.11n. What are the differences between 802.11n and 802.11ac?
802.11n uses a system called MIMO (Multiple-Input Multiple-Output) to transmit multiple spatial streams to another device that implements 11n. This is accomplished by using spatial multiplexing, a technique used in wireless MIMO technology to transmit multiple data streams simultaneously.
With MIMO technology, 802.11n devices could reach a maximum theoretical data rate of 600 (Mbits/s). 802.11ac outlines the use of eight spatial streams, which has a theoretical data rate of 6933.3 Mbits/s. This is a huge boost over 802.11n because it allows for gigabit speeds over wireless. These are, of course, the best case rates. Most 802.11n devices will perform at 405.0-450.0 Mbits/s because vendors typically only implement up to three spatial streams. In 802.11ac, three spatial streams will perform at about 2106-2340 Mbits/s, which still represents a large increase over 802.11n.
To read the full article, click here
Related Semiconductor IP
- 802.11 AX
- IEEE 802.11n/ac/ax (WiFi) LDPC Decoder and Encoder
- Fully Configurable LDPC Encoder
- 802.11a/b/g/n/ac Transceiver
Related Articles
- Characterizing licensable core performance; Find out why comparing processor cores is tricky and learn what to look for.
- What floorplan information is needed for synthesis
- What is power debugging?
- What! How big did you say that FPGA is? (Team-design for FPGAs)
Latest Articles
- A Secure dToF LiDAR SoC with Dual-Domain Fingerprinting and Event-Driven AFE Circuit Achieving Sensor-Level Attack Resilience
- ZTA-Q: an Open-source RISC-V Platform for Accurate Quantized CNN Inference
- Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM
- U-Sonic: An Open-Source 8-Channel Ultrasound Transmit IP in a 130 nm RISC-V SoC
- S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM