Understanding virtualization facilities in the ARMv8 processor architecture

Sergey Temerkhanov (Auriga, Inc.) & Igor Pochinok (MSU RCC)
embedded.com (September 20, 2018)

Virtualization facilities in ARMv8-based systems play a special role in these systems and consist of several components. While ARMv7 had a special CPU mode to run a hypervisor as an extension, in ARMv8, it has become a part of the architecture, and it has been integrated into the privilege-level system under the name EL2. At the same time, this mode only solves problems associated with the CPU accessing system resources, such as memory and peripherals. To improve the efficiency of transactions initiated by devices in a virtualized environment, a number of components have been developed for ARMv8-based systems, such as new interrupt controllers and IOMMUs. This article provides an overview of these facilities from the perspective of system software development.

Virtualization in ARMv8-based systems is organized as shown in Figure 1: the EL2 privilege level runs a hypervisor controlling the execution of virtual machines’ (VM) code and sharing of resources between them. The levels of EL1 (OS kernel, privileged code) and EL0 (unprivileged code) are left for VM instances. Address translation is performed in two stages (Figure 2): in the first stage, a so-called intermediate physical address (IPA) is calculated from a virtual address using first-level translation tables (pointers held in TTBR0_EL1/TTBR1_EL1 registers); in the second stage, the real physical address is calculated using the second-level table prepared by the hypervisor (the pointer is stored in the VTTBR_EL2 register). Such an organization provides effective privilege separation and isolation of VMs from the hardware. This allows, for example, one to have many instances of an identical VM.

To read the full article, click here