The Case for DDR-XAUI
Ori Aruj, Dune Networks
Oct 11, 2007 (8:15 PM) -- commsdesign.com
Recent developments in the networking and silicon markets are driving the support of multiple ports of 10 Gigabit Ethernet to the limit. High levels of integration dictate that large numbers of XAUI interfaces must be integrated in silicon to a level where silicon devices are bound by their external interface limitations rather then their internal bandwidth.
In order to minimize the number of SerDes lanes, higher speed lanes are required. The options available today are 6.25Gbps and 10Gbps (XFI) lanes. This article argues that there is a strong business case for DDR-XAUI, a two lane 6.25Gbps XAUI in addition to XFI.
XAUI is an important compatibility interface for 10 Gigabit Ethernet component and system implementers. It provides the low pin-count and long board trace lengths that system vendors need to drive down port costs.
XAUI supports 10Gbps by using four SerDes 3.125Gbps lanes, each lane encoding data with an 8B/10B code. XAUI reduces 10 Gigabit Ethernet's 72 pin XGMII to 16 pins, enabling higher density and lower cost switching chips and optical transceivers. The lower pin count and longer trace lengths allow a single chip to support multiple 10 Gigabit Ethernet ports.
Oct 11, 2007 (8:15 PM) -- commsdesign.com
Recent developments in the networking and silicon markets are driving the support of multiple ports of 10 Gigabit Ethernet to the limit. High levels of integration dictate that large numbers of XAUI interfaces must be integrated in silicon to a level where silicon devices are bound by their external interface limitations rather then their internal bandwidth.
In order to minimize the number of SerDes lanes, higher speed lanes are required. The options available today are 6.25Gbps and 10Gbps (XFI) lanes. This article argues that there is a strong business case for DDR-XAUI, a two lane 6.25Gbps XAUI in addition to XFI.
XAUI is an important compatibility interface for 10 Gigabit Ethernet component and system implementers. It provides the low pin-count and long board trace lengths that system vendors need to drive down port costs.
XAUI supports 10Gbps by using four SerDes 3.125Gbps lanes, each lane encoding data with an 8B/10B code. XAUI reduces 10 Gigabit Ethernet's 72 pin XGMII to 16 pins, enabling higher density and lower cost switching chips and optical transceivers. The lower pin count and longer trace lengths allow a single chip to support multiple 10 Gigabit Ethernet ports.
To read the full article, click here
Related Semiconductor IP
- nQrux® Root of Trust IP
- AXI to UCIe Bridge IP
- UCIe 2.x Controller IP
- SWI3S (SoundWire I3S Interface) Peripheral Controller Core IP
- OpenTitan-based RISC-V Secure Element
Related Articles
- The case for de-integrating embedded Flash
- The complete series of high-end DDR IP solutions of Innosilicon is industry-leading and across major foundry processes
- The Quest for Reliable AI Accelerators: Cross-Layer Evaluation and Design Optimization
- Verification and Validation (V&V)-in-the-Loop for RISC-V Design: The Holistic Vision of BZL
Latest Articles
- A Secure dToF LiDAR SoC with Dual-Domain Fingerprinting and Event-Driven AFE Circuit Achieving Sensor-Level Attack Resilience
- ZTA-Q: an Open-source RISC-V Platform for Accurate Quantized CNN Inference
- Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM
- U-Sonic: An Open-Source 8-Channel Ultrasound Transmit IP in a 130 nm RISC-V SoC
- S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM