Vendor: TES Electronic Solutions Category: Voltage Reference

250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS

The TS_IREF_88uA_X8 is a current reference biasing circuit which provides a sink/source ZTAT (zero-toabsolute temperature) temper…

X-FAB 180nm XT018 Available on request View all specifications

Overview

The TS_IREF_88uA_X8 is a current reference biasing circuit which provides a sink/source ZTAT (zero-toabsolute temperature) temperature-independent current from 250nA up to 88μA and supplied with 3.3V. As shown in Figure 1, the current reference circuit consists of a bandgap circuit generating a ZTAT voltage 𝑉𝐵𝐺 and by using an OTA, an NMOS transistor, and a trimmed P-doped poly resistor (temperature independent), a ZTAT current can be generated and copied using current mirrors. The bandgap voltage 𝑉𝐵𝐺 is also provided as an output in case it is needed as a reference voltage. Digital trimming is available for the generated current through trimming bits. The current reference also provides an Enable signal to control whether to turn on or shutdown the bandgap circuit and consequently the biasing circuit.

Technology: X-FAB XT018-0.18μm BCD-on-SOI CMOS

OPERATING CONDITIONS
 

Parameters Min. Typ. Max. Unit
Junction temperature range -40 27 150 ºC
Supply voltage on VCC with respect to ground GNDS 3.2 3.3 3.4 V


SPECIFICATION
 

Parameters Min. Typ. Max. Unit
Output bandgap voltage 1.190 1.119 1.201 V
250nA output current 205 252 304 nA
88uA output current 71 88 106 uA
Current Reference Area   0.19   mm²

Block Diagram

Block diagram of the current reference circuit
1 / 2
Keyboard arrows: ← → • Enter: fullscreen • Esc: close

Silicon Options

Foundry Node Process Maturity
X-FAB 180nm XT018 Available on request

Specifications

Identity

Part Number
TS_IREF_88uA_X8
Vendor
TES Electronic Solutions
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about Voltage Reference IP core

A scalable, shader-programmable vector graphics GPU core for low-power MCUs

To meet the growing graphics demands, the industry is shifting toward scalable, shader programmable architectures. Unlike fixed-function graphics accelerators, shader programmable GPUs offer the flexibility required to target diverse market segments and at the same time ensure software portability and maintainability. Furthermore, adopting platform-independent stacks based on industry standards allows accelerating time-to market by developing applications on standard PC platforms before deployment to target hardware. TES Electronic Solutions in Germany addresses these challenges with the D/AVE NX GPU core. Engineered specifically for resource-constrained environments, it supports OpenGL ES 2.0 shader programmability with selected 3.x and vector graphics extensions.

TES offers new voltage buffer IPs

TES Electronic Solutions GmbH offers two new voltage buffer IPs with driving capabilities up to 6 mA, built on X-FAB’s XT018-0.18µm BCD-on-SOI process and operate across a junction temperature range of -40°C to 150°C with a supply voltage of 3.2V to 3.4V.

Frequently asked questions about Voltage Reference IP cores

What is 250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS?

250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS is a Voltage Reference IP core from TES Electronic Solutions listed on Semi IP Hub. It is listed with support for x-fab Available on request.

How should engineers evaluate this Voltage Reference?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Voltage Reference IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP