Managing energy consumption in wireless IoT devices
Jacob Beningo
embedded.com (March 31, 2018)
As the IoT develops and more edge devices are deployed in the field, undoubtedly a significant portion of those devices will be battery operated. Battery operated wireless edge nodes are convenient and cost effective because they require no access to electrical infrastructure and can be easily deployed. The potential problem with battery operated devices is that when developers are under the gun to get their devices built and out the door, battery life is one of the last things on their mind. There are several things that a developer can do throughout their development cycle to ensure that they will be able to properly manage their device’s energy consumption.
First, when a developer is designing their hardware, they need to break-up their hardware into subsystems and provide the ability to add a current shunt resistor to measure the current consumption for each subsystem.
To read the full article, click here
Related Semiconductor IP
- TSMC 7nm 0V75 / 0V9 ESD Local Clamp – Low Cap
- TSMC 65nm 3V3 ESD Local Clamp – Rad Hard
- TSMC 5nm 1V8, 1.2V and 0.9V ESD Local Protection – Low Cap
- TSMC 3nm 3V3 ESD Local Clamp
- TSMC 3nm 1V2 ESD Local Clamp – Low Capacitance
Related Articles
- Firmware Compression for Lower Energy and Faster Boot in IoT Devices
- MIPI in next generation of AI IoT devices at the edge
- Securing IoT Devices With ARM TrustZone
- Bluetooth Developer? Why Reinvent the Wireless Radio... Use the CORDIO BT4 Radio IP
Latest Articles
- LACE: Large Language Model Aided Multi-Agent Framework for Agile RISC-V Instruction Extension
- A Process-Aware Hybrid Si/IGO Monolithic-3D 6T SRAM with BEOL Pass-Gates for the 2nm Node
- Automated Estimation of MBIST Area and Test Time in Heterogeneous Memory IPs via Stacked Ensemble Framework
- VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration
- CTTE: An Open Dual-Protocol RISC-V Trace Encoder for N-Trace and E-Trace