How to test carrier aggregation in LTE-Advanced networks
Dr. Stamatis Georgoulis Aeroflex Test Solutions
6/27/2012 8:28 AM EDT
For LTE-Advanced, 3GPP Release 10 introduced several new features to augment the existing LTE standard, and these are aimed at raising the peak downlink data rate to 1 Gbps and beyond, as well as reducing latency and improving spectrum efficiency. Targets have also been set enabling the highest possible cell edge user throughput to be achieved.
If the high data rate targets are to be met, LTE-Advanced will require a channel bandwidth that is much wider than the 20 MHz currently specified for LTE. This will not be possible with just a single carrier in the limited spectrum bands available to most operators. Consequently, carrier aggregation—the ability to combine multiple carriers scattered around the spectrum—will be a key measure to achieve the wider effective bandwidth that will be required, typically up to 100 MHz. This means that multiple carriers comprised of either contiguous or non-contiguous spectrum need to be added together to allow these wider channel bandwidths—and thus faster data rates—to be achieved.
Implementing carrier aggregation in a network will mean that operators and infrastructure vendors will require a test mobile equipped with carrier aggregation, ahead of real mobile terminals becoming available.
To read the full article, click here
Related Semiconductor IP
- Peripheral Sensor Interface (PSI5) Host Controller
- Link Acceleration Unit
- 64-bit, RISC-V, ultra-high performance processors
- 64-bit, RISC-V, performance and data computation processors
- 32-bit, RISC-V, deeply embedded processors
Related Articles
- Test engineers must join ASIC flow early
- SoC Test and Verification -> How to verify ADSL chips
- SoC Test and Verification -> Modular ASICs ease test problems
- SoC Test and Verification -> Testing mixed-signal Bluetooth designs
Latest Articles
- Design and Development of a Neuromorphic Silicon Suite: PVT Sensing, Stochastic LIF Inference, On-Chip STDP Learning, and Crossbar Programming
- LLM4RTL: Tool-Assisted LLM for RTL Generation
- Towards Delta Aware Training: Efficient DNN Weight Storage for Resource-Constrained FPGAs
- CHERI-D: Secure and efficient inline object ID for CHERI temporal memory safety
- AIA: A 16nm Multicore SoC for Approximate Inference Acceleration Exploiting Non-normalized Knuth-Yao Sampling and Inter-Core Register Sharing