How to reduce power using I/O gating (CPLDs) versus sleep modes (FPGAs)
By Roger Seaman, Xilinx
September 20, 2006 -- pldesignline.com
Understanding the differences between low power CPLDs (that use built-in I/O gating features to save power) and non-volatile FPGAs (that employ "Sleep Modes").
This article discusses the differences between low power CPLDs with a built-in I/O gating feature, and the various "sleep modes" used by non-volatile FPGAs. Low power CPLDs with I/O gating have many advantages over sleep modes, including the ability to use selected portions of the device. These CPLDs are built on an inherently ultra-low-power patented technology that reduces standby current to as low as 20 microamps.
The technology, known as Fast Zero Power, enables you to build fast, low power handheld consumer devices using programmable logic. Internal input/output (I/O) gating is an advanced feature of these devices that enables the design to gate out unwanted signals during actual operation, thus saving additional power from unwanted toggling of I/Os and downstream logic. You have to ability to select the inputs and outputs for gating, and turn them on and off at will.
September 20, 2006 -- pldesignline.com
Understanding the differences between low power CPLDs (that use built-in I/O gating features to save power) and non-volatile FPGAs (that employ "Sleep Modes").
This article discusses the differences between low power CPLDs with a built-in I/O gating feature, and the various "sleep modes" used by non-volatile FPGAs. Low power CPLDs with I/O gating have many advantages over sleep modes, including the ability to use selected portions of the device. These CPLDs are built on an inherently ultra-low-power patented technology that reduces standby current to as low as 20 microamps.
The technology, known as Fast Zero Power, enables you to build fast, low power handheld consumer devices using programmable logic. Internal input/output (I/O) gating is an advanced feature of these devices that enables the design to gate out unwanted signals during actual operation, thus saving additional power from unwanted toggling of I/Os and downstream logic. You have to ability to select the inputs and outputs for gating, and turn them on and off at will.
To read the full article, click here
Related Semiconductor IP
- Peripheral Sensor Interface (PSI5) Host Controller
- Link Acceleration Unit
- 64-bit, RISC-V, ultra-high performance processors
- 64-bit, RISC-V, performance and data computation processors
- 32-bit, RISC-V, deeply embedded processors
Related Articles
- How to Design SmartNICs Using FPGAs to Increase Server Compute Capacity
- Growing demand for high-speed data in consumer devices gives rise to new generation of low-end FPGAs
- How to power FPGAs with Digital Power Modules
- It's Not My Fault! How to Run a Better Fault Campaign Using Formal
Latest Articles
- Design and Development of a Neuromorphic Silicon Suite: PVT Sensing, Stochastic LIF Inference, On-Chip STDP Learning, and Crossbar Programming
- LLM4RTL: Tool-Assisted LLM for RTL Generation
- Towards Delta Aware Training: Efficient DNN Weight Storage for Resource-Constrained FPGAs
- CHERI-D: Secure and efficient inline object ID for CHERI temporal memory safety
- AIA: A 16nm Multicore SoC for Approximate Inference Acceleration Exploiting Non-normalized Knuth-Yao Sampling and Inter-Core Register Sharing