Home automation system design: the basics
Tushar Rastogi and Rahul Raj Sharma (Cypress Semiconductor)
embedded.com (June 11, 2014)
Home automation is a method of controlling home appliances automatically for the convenience of users. This technology makes life easier for the user, and saves energy by utilizing devices according to strict requirements. Controls can be as basic as dimming lights with a remote or as complex as setting up a network of items in the home that can be programmed using a main controller or even via cell phone from anywhere in the world.
A home automation system can involve switching off electrical appliances like air-conditioners or refrigerators when a desired temperature has been reached, then switching on again when the temperature has crossed a certain value. A home automation system can also be used to secure a house from burglars by sending alerts to the nearest police station and the homeowner in case a trespasser is sensed.
Related Semiconductor IP
- nQrux® Root of Trust IP
- AXI to UCIe Bridge IP
- UCIe 2.x Controller IP
- SWI3S (SoundWire I3S Interface) Peripheral Controller Core IP
- OpenTitan-based RISC-V Secure Element
Related Articles
- Differentiation Through the Chip Design and Verification Flow
- System on Modules (SOM) and its end-to-end verification using Test Automation framework
- Four ways to build a CAD flow: In-house design to custom-EDA tool
- Emerging Trends and Challenges in Embedded System Design
Latest Articles
- A Secure dToF LiDAR SoC with Dual-Domain Fingerprinting and Event-Driven AFE Circuit Achieving Sensor-Level Attack Resilience
- ZTA-Q: an Open-source RISC-V Platform for Accurate Quantized CNN Inference
- Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM
- U-Sonic: An Open-Source 8-Channel Ultrasound Transmit IP in a 130 nm RISC-V SoC
- S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM