Building advanced Cortex-M3 applications
By Jean J Labrosse from Micrium, Lotta Frimanson and Anders Lundgren from IAR Systems
Embedded.com (04/08/09, 12:36:00 AM EDT)
The ARM Cortex-M3 architecture provides many improvements compared with its predecessor, the popular ARM7/9, and is designed to be particularly suitable for cost-sensitive embedded applications that require deterministic system behavior.
This article describes how developers can best utilize the advanced capabilities of the Cortex-M3 when designing embedded applications.
Comparing ARM7/9 to Cortex-M3
Cortex-M3 is a member of the Cortex-M family, one of the three ARM Cortex architectures that were introduced to the embedded marketplace in 2004, and is being integrated into low-cost embedded microcontrollers (MCUs) from an increasing number of silicon vendors.
A comparison of the main characteristics of Cortex-M3 with those of ARM7/9 is shown in Table 1 below.
Table 1: Comparison of ARM7/9 and Cortex-M3 characteristics
The Cortex-M3 improves on the ARM7/9 in most qualitative estimates " simpler stack architecture, better interrupt controller, and higher-performance instruction set, as well as enhanced debug capabilities, all of which can significantly affect end-product performance.
Embedded.com (04/08/09, 12:36:00 AM EDT)
The ARM Cortex-M3 architecture provides many improvements compared with its predecessor, the popular ARM7/9, and is designed to be particularly suitable for cost-sensitive embedded applications that require deterministic system behavior.
This article describes how developers can best utilize the advanced capabilities of the Cortex-M3 when designing embedded applications.
Comparing ARM7/9 to Cortex-M3
Cortex-M3 is a member of the Cortex-M family, one of the three ARM Cortex architectures that were introduced to the embedded marketplace in 2004, and is being integrated into low-cost embedded microcontrollers (MCUs) from an increasing number of silicon vendors.
A comparison of the main characteristics of Cortex-M3 with those of ARM7/9 is shown in Table 1 below.
Table 1: Comparison of ARM7/9 and Cortex-M3 characteristics
The Cortex-M3 improves on the ARM7/9 in most qualitative estimates " simpler stack architecture, better interrupt controller, and higher-performance instruction set, as well as enhanced debug capabilities, all of which can significantly affect end-product performance.
To read the full article, click here
Related Semiconductor IP
Related Articles
- Migrating ARM7 code to a Cortex-M3 MCU
- Introducing ARM Cortex-M23 and Cortex-M33 Processors with TrustZone for ARMv8-M
- Amba bus may move MIPS into ARM territory
- Rapidly Implementing Synthesizable ARM IP (By Alan Gibbons, Synopsys and John Biggs, ARM)
Latest Articles
- LLM Agent-Based Design of RISC-V CPUs with FPGA-in-the-Loop Evaluation
- Automated Multi-Line Bug Repair Using Model Checker Aided LLMs: A Case Study on RISC-V Processors
- Cryogenic Recharacterization of a Commercial 22 nm FD-SOI Foundry Standard-Cell Library
- A 105 MS/s 4.18 nJ/inference 0.765 mm² Mixed-Signal Streaming ML Engine for Wireless Baseband in 12LP+ FinFET
- Agentic AI for Heterogeneous System Design Across Chip, Scale-Up, and Scale-Out Domains