TES Electronic Solutions GmbH is a leading electronics design company and technology supplier. With a deep focus on embedded platforms and wireless solutions, TES provides high-end design services and IP for video I/O, embedded graphics, and human-machine interface (HMI) technologies. TES serves a global customer base across diverse markets, delivering everything from expert consultancy to full turnkey product development.
30V 0.5A Hysteretic Buck LED Driver
30V 0.5A Hysteretic Buck LED Driver with High-Side and Low-Side Current Sensing on X-FAB XT018-0.18µm BCD-on-SOI CMOS
Junction Over-Temperature Detector with Linear Centigrade-to-Voltage Output - X-FAB XT018
The TS_TEMP_DET_X8 is a hysteresis detector that asserts output OVERTJ once junction temperature exceeds 147.2°C and subsequently…
250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS
The TS_IREF_88uA_X8 is a current reference biasing circuit which provides a sink/source ZTAT (zero-toabsolute temperature) temper…
Clock Buffer - X-FAB XT018-0.18µm BCD-on-SOI CMOS
The TS_CLKBUF_25pF_X8 transfers input clock signal to other digital or mixed-signal chips, which feature altogether a maximum loa…
8MHz / 40MHz Pierce Oscillator - X-FAB XT018-0.18µm
The TS_XOSC_40M_X8 is a 8MHz / 40MHz Pierce oscillator that generates a VCC-level logic square wave when a 8MHz / 40MHz quartz cr…
Voltage Latched Comparator - X-FAB XT018
A high-speed voltage clocked comparator with rail- to-rail outputs and no hysteresis.
Configurable CPU tailored precisely to your needs
The TES µEngine concept enables complex digital circuit tasks to be created as software-defined functions executed by mini-comput…
The TS_CAN_3V3_X8 is a 3.3V CAN transceiver, which supports data rates up to 1Mbps and is compatible with ISO 11898-2 compliant C…
The Controller Area Network (CAN) is a reliable serial bus protocol defined in the Bosch CAN specifications for standard CAN 2.0B…
Customizable Display Controller IP
CDC is a fully Customizable Display Controller IP supporting up to 16k resolutions (4096x4096 pixel) on a MIPI-DPI compliant para…
The Controller Area Network is a high reliable serial bus protocol defined in the Bosch CAN specification 2.0B.
D/AVE 2D is a 2D GPU Hardware IP Core, optimized for easy integration into FPGAs and ASICs.
Band-Gap Voltage Reference with dual 2µA Current Source - X-FAB XT018
The TS_BG_02uA_X8 provides a 1.21V band-gap voltage reference as well as two 2µA current sources, from one supply voltage on VDDA…
13ns High-Speed Comparator with no Hysteresis
The TS_CMP_13ns_X8 is a high-speed comparator with no hysteresis and a propagation delay of 13ns while having a differential inpu…
50mA 1.8V Voltage Regulator with Power-Good Signal on XFAB XT018
The TS_VR_1V8_X8 is a 1.8V linear voltage regulator (LDO) designed to supply the digital core of an ASIC.
10mA 3.3V Low-Dropout (LDO) Regulator on XFAB XT018
The TS_VR_3V3_X8 is a 3.3V low-dropout linear regulator (LDO) to supply the digital core of an analog ASIC.
The TS_ADC_10b_X8 is a 10-bit capacitive successive approximation register (SAR) Analog-to-Digital converter (ADC).
Octuple 20uA Bias Current Source
The TS_CS_20uA_X8 is a current generator sourcing 20µA via each terminal IBPU through IBPU, for the biasing of other TES IPs like…
The TS_SW_4Cap_X8 is a quadruple capacitor switch that is primarily used for resonator/transducer trimming.
16mA 4V Voltage Regulator on XFAB XT018
The TS_VR_4V00_X8 is a 4V voltage regulator capable of delivering up to 16mA.