The Platform Based SOC Design that Utilizes Structured ASIC Technology
The Platform Based SOC Design that Utilizes Structured ASIC Technology
Vendor:
Faraday Technology
Category:
PLL
Input 2MHz~16MHz, output 16~72MHz and 72MHz~200MHz, 1.08~1.32V PLL; UMC 55nm Low Power Process.
Input 2MHz~16MHz, output 16~72MHz and 72MHz~200MHz, 1.08~1.32V PLL; UMC 55nm Low Power Process.
Overview
Input 2MHz~16MHz, output 16~72MHz and 72MHz~200MHz, 1.08~1.32V PLL; UMC 55nm Low Power Process.
Silicon Options
| Foundry | Node | Process | Maturity |
|---|---|---|---|
| UMC | 55nm | 55nm 550 nm | Pre-Silicon |
Specifications
Identity
Part Number
FXPLL004HF0L
Vendor
Faraday Technology
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
Taiwan
Learn more about PLL IP core
Creating a Frequency Plan for a System using a PLL
How do you ensure that every part of a system receives the clock it needs—without wasting power or sacrificing performance? The answer lies in creating a well-structured frequency plan built around a PLL.
CoreHW Develops 80GHz mmWave PLL with Synopsys RFIC Design Flow on GlobalFoundries 22FDX Technology
Jian Yang, Sween Kang (Synopsys)
Specifying a PLL Part 3: Jitter Budgeting for Synthesis
This white paper is aimed at system architects and physical implementation leaders working on the design of SoCs. It can be confusing to understand the impact of different jitter sources and how to calculate a jitter budget when specifying a digital system. This white paper explains how jitter changes the period of a clock and how to ensure that jitter has correctly been accounted for in the calculations for timing closure.
Specifying a PLL Part 2: Jitter Basics
This article explains a some of the key terminology and parameters commonly used to describe jitter. It will also help clarify the most important parameters for a some PLL applications, allowing the designer to better understand what is required from a PLL.
Specifying a PLL Part 1: Calculating PLL Clock Spur Requirements from ADC or DAC SFDR
In high end RF systems, such as 5G radios, the requirements are so stringent that the source of this strongest unwanted tone can be the PLL. This article outlines how spurs in the input clock to the ADC or DAC may limit the SFDR. This in turn will set the requirements for the spurs for the input clock (from a PLL), in order to achieve a specific SFDR.
Frequently asked questions about PLL IP cores
What is Input 2MHz~16MHz, output 16~72MHz and 72MHz~200MHz, 1.08~1.32V PLL; UMC 55nm Low Power Process.?
Input 2MHz~16MHz, output 16~72MHz and 72MHz~200MHz, 1.08~1.32V PLL; UMC 55nm Low Power Process. is a PLL IP core from Faraday Technology listed on Semi IP Hub. It is listed with support for umc Pre-Silicon.
How should engineers evaluate this PLL?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this PLL IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.