Vendor: Nuclei System Technology Category: Ethernet

Gigabit Ethernet Controller

XEC is a high performance 1000M/100M/10M Ethernet Controller IP.

Overview

XEC is a high performance 1000M/100M/10M Ethernet Controller IP. It support GMII/RGMII/MII/RMII MAC-PHY interface and support AXI/AHB system bus.
XEC can receive the data from Ethernet PHY to the AXI/AHB bus, and to send out data from AXI/AHB bus to the Ethernet PHY.

Key features

  • 10/100/1000 full-duplex, 10/100 half-duplex. The customer can choose only support 10/100M when configure the IP
  • GMII/RGMII/MII/RMII interface
  • AXI/AHB system interface. The customer can choose AXI or AHB interface when configure the IP
  • Compliant with IEEE 802.3-2008 standard and IEEE 802.3az standard
  • Support to configure the total rx and tx SRAM size with the value of 8KB, 12KB, 16KB and 24KB. The customer can choose the size when configure the IP
  • Up to 32 additional 48-bit mac source address filter with mask for each byte. The customer can choose the number from 0 to 32 when configure the IP
  • Up to 32 additional 48-bit mac destination address filter with mask for each byte. The customer can choose the number from 0 to 32 when configure the IP
  • Receive packet and send packet’s MIB statistics support
  • Asymmetric/symmetric flow control
  • SVLAN and VLAN detect
  • CVLAN tag insertion/removal
  • Magic packet detect
  • Multicast frame, broadcast frame and unicast address filtering
  • Support jumbo packets up to 4KB
  • Support clause22 and clause 45 MDIO operation
  • IPv4, IPv6, TCP, UDP, ICMP checksum verification in Rx path
  • IPv4, IPv6, TCP, UDP, ICMP checksum offload in Tx path
  • Support dynamic clock gating to save power
  • Support 1588 PTP protocol. The customer can choose this function when configure the IP
  • Support PPS_OUT function to output the local RTC value to the external PPS_OUT pad
  • Support to sync the local RTC with the external PPS_IN pad when acted as a 1588 master. The customer can choose this function when configure the IP

Specifications

Identity

Part Number
GMAC
Vendor
Nuclei System Technology
Type
Silicon IP

Files

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about Ethernet IP core

Enhancing Ethernet Security with MACsec

Ethernet was originally designed for high-speed data transfer and interoperability between devices. However, traditional Ethernet does not provide built-in mechanisms for securing data traffic, such as encryption or authenticity protection. This is where MACsec comes into the picture.

What Makes Ethernet IP Truly Automotive-Grade

This blog examines what separates truly automotive-grade Ethernet IP from generic implementations across functional safety, time-sensitive networking, security, observability, lifecycle management, and the integration disciplines that only become visible once a program is deep into development.

Frequently asked questions about Ethernet IP cores

What is Gigabit Ethernet Controller?

Gigabit Ethernet Controller is a Ethernet IP core from Nuclei System Technology listed on Semi IP Hub.

How should engineers evaluate this Ethernet?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Ethernet IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP