1.8V GPIO, 1.8V & 3.3V Analog in TSMC 180nm BCD
A Flip-Chip compatible I/O Library in TSMC 180nm BCD with 1.8V GPIO, 1.8V to 3.3V Analog, with associated ESD cells.
Wirebond I/O Library in TSMC 130nm
A radiation-hardened TSMC 130nm Wirebond I/O Library with 3.3V GPIO, 3.3V LVDS TX & RX, 3.3V I2C ODIO, 3.3V Analog cell, OTP cell…
Ultra-low leakage I/O Library in TSMC 22nm
A TSMC 22nm Wirebond I/O Library with ultra-low leakage 1.8V GPIO, 1.8V I2C ODIO, 1.8V analog cell and associated ESD.
The TRC16024CPA is a four lane Gen 1,2,3,4 PCI Express Physical layer (Phy) Phy IP core, delivering high-speed serial data transm…
5V I/O and ESD in TSMC 12nm FFC/FFC+
A 5V Library for Generic I/O and ESD Applications TSMC 12NM FFC/FFC+ process.
180nm MTP Non Volatile Memory for Standard CMOS Logic Process
NSCore's TwinBit(TM) is the only embedded CMOS, multi-time programmable (MTP), non-volatile RAM IP of its kind, utilizing the 'ho…
The I2C library provides open-drain bi-directional I/O cells designed for the I2C two-line interface.
The CML library provides a differential current mode logic clock driver to support REFCLK signaling in PCIe applications along wi…
1.8V Programmable 100MHz Oscillator Staggered I/O Pad Set
The 1.8V 100MHz Oscillators library includes a programmable oscillator macro I/O cell.
The LPDDR2/3_DDR3/4 libraries contain the 7-way combo driver/receiver cells with embedded power cells, the driver impedance calib…
The ONFI 4.1 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage ref…
The 1.8V Fault-Tolerant General Purpose I/O library provides a 3.3V tolerant programmable, bidirectional I/O that give the system…
1.8V General Purpose I/O Inline Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along …
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along …
The CI Plus library provides a programmable bi-directional I/O cell designed to meet the signal interface requirements of the Com…
1.8V 3.3V Tolerant General Purpose IO
The 1.8V GPIO 3VT library provides general purpose bidirectional I/O cells that are both fault tolerant and 3.3V tolerant.
3.3V 100MHz Oscillator I/O Pad Set
The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell.
The ONFI 4.1 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage ref…
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells.
1.8V General Purpose Inline I/O Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells.