The challenges of next-gen multicore networks-on-chip systems: Part 2
By Luca Benini and Giovanni De Micheli, Embedded.com
Feb 12 2007 (0:30 AM) -- Embedded.com
There are several hardware types of SoC designs that can be defined according to the required functionality and market. In general, SoCs can be classified in terms of their versatility (i.e., support for programming) and application domains. A simple taxonomy is described next:
General-purpose on-chip multiprocessors are high-performance chips that benefit from spatial locality to achieve high performance. They are designed to support various applications, and thus the processor core usage and traffic patterns may vary widely. They are the evolution of on-board multiprocessors, and they are typified by having a homogeneous set of processing and storage arrays.
For these reasons, on-chip network design can benefit from the experience on many architectures and techniques developed for on-board multiprocessors, with the appropriate adjustments to operate on a silicon substrate.
Feb 12 2007 (0:30 AM) -- Embedded.com
There are several hardware types of SoC designs that can be defined according to the required functionality and market. In general, SoCs can be classified in terms of their versatility (i.e., support for programming) and application domains. A simple taxonomy is described next:
General-purpose on-chip multiprocessors are high-performance chips that benefit from spatial locality to achieve high performance. They are designed to support various applications, and thus the processor core usage and traffic patterns may vary widely. They are the evolution of on-board multiprocessors, and they are typified by having a homogeneous set of processing and storage arrays.
For these reasons, on-chip network design can benefit from the experience on many architectures and techniques developed for on-board multiprocessors, with the appropriate adjustments to operate on a silicon substrate.
To read the full article, click here
Related Semiconductor IP
- Ultra Ethernet MAC & PCS 100G/200G/400G/800G
- Ethernet PCS 100G/200G/400G/800G/1.6T
- Ethernet MAC 100G/200G/400G/800G/1.6T
- Junction Over-Temperature Detector with Linear Centigrade-to-Voltage Output - X-FAB XT018
- Performance P570 Gen 3
Related Articles
- Next Gen Scan Compression Technique to overcome Test challenges at Lower Technology Nodes (Part - I)
- Handling the Challenges of Building HPC Systems We Need
- Paving the way for the next generation audio codec for the True Wireless Stereo (TWS) applications - PART 1 : TWS challenges explained
- Paving the way for the next generation audio codec for True Wireless Stereo (TWS) applications - PART 2 : Increasing play time
Latest Articles
- Closer in the Gap: Towards Portable Performance on RISC-V Vector Processors
- TTP: A Hardware-Efficient Design for Precise Prefetching in Ray Tracing
- Heterogeneous SoC Integrating an Open-Source Recurrent SNN Accelerator for Neuromorphic Edge Computing on FPGA
- A Reconfigurable Multiplier Architecture for Error-Resilient Applications in RISC-V Core
- ObfAx: Obfuscation and IP Piracy Detection in Approximate Circuits