Real-Time Trace: A Better Way to Debug Embedded Applications
James Campbell, Valeriy Kazantsev (Synopsys Inc.), Hugh O’Keeffe (Ashling Microsystems)
Firmware and application software development is often the critical path for many embedded designs. Problems that appear in the late phases of the development can be extremely difficult to track down and debug, thus putting project schedules at risk. Traditional debug techniques cannot always help to localize the issue. This white paper shows the benefits of debugging with ‘real-time trace’ hardware assistance, including how it can vastly reduce the amount of time needed to track down problems in the code, and introduces other benefits, such as hot-spot profiling and code coverage, offered by real-time trace systems.
Related Semiconductor IP
- Zigbee Transceiver PHY
- Data Flow Architecture IP
- AMBA SPI Controller MRAM Controller
- Ethernet MAC
- Protocol Bridges
Related Articles
- Paving the way for the next generation of audio codec for True Wireless Stereo (TWS) applications - PART 5 : Cutting time to market in a safe and timely manner
- Tools for Test and Debug : Embedded real-time behavior requires "design-in" processes
- Practical Applications of Data Abstraction Techniques for Embedded Systems Debug
- Trace Based Approach for Unit Level Debug and Verification of C/C++ IP Models
Latest Articles
- A Low-Latency ASIC Architecture for Real-Time Line Segment Detection
- BitFair: A 12nm Bit-Serial CNN Accelerator with Learnable Early Termination and Adaptive Bit Ordering for Ultra-Low-Power XR Vision
- A Flexible Sparsity-Aware FPGA Accelerator with Column-Wise Compression for Efficient CNN Inference
- Reducing Instruction-Fetch Energy in RISC-V for Embedded AI Processing via Dynamic and Static Loop Caching
- SPARC: Automated Root-Cause Analysis of Pre-Silicon Power Side-Channel Leakage in the Processor Design Flow