Have you checked the hidden costs of deploying an open source RISC-V core?
It is often implied that if you use an open source processor core there are no costs associated with using it. Of course, the RTL may be free of a license fee and royalties and it might be possible to access a free of charge toolchain for RISC-V, but there are plenty of hidden costs associated with using the core in a real integrated circuit design.
If you are using the core in a production design, you are almost certainly wanting to use commercial EDA tools for verification, synthesis and static analysis checks. You also need to start developing your embedded software and will need access to a suitable instruction set simulator and/or FPGA emulation. Ideally, you will also want to access comprehensive documentation and customer support for using the core. A lot of elements are needed to successfully use the core in your design.
To read the full article, click here
Related Semiconductor IP
- RISC-V Display Connectivity Subsystem (DCS)
- RISC-V IOPMP IP
- RISC-V Debug & Trace IP
- Gen#2 of 64-bit RISC-V core with out-of-order pipeline based complex
- 64-bit RISC-V core with in-order single issue pipeline. Tiny Linux-capable processor for IoT applications.
Related Blogs
- Using OSVVM for DVB-S2 IP Core Validation
- Jeff Bier's Impulse Response - Open Source Digital Signal Processing?
- Adapteva's Epiphany Floating Point Processor Core: A Leading-Edge Lithography May Finally Open Doors
- Beware licensing issues when using open source
Latest Blogs
- Inside the SiFive Performance™ P570 Gen 3: High Performance Efficiency for Next-Generation Consumer and Commercial Applications
- What the steam engine can teach us about modern chip design
- Automotive silicon in the era of AI, functional safety, and cybersecurity
- JPEG XS Officially Joins GenICam, The Machine Vision Standard Managed By EMVA
- Beyond PCIe Compliance: Why Stress Testing Is Crucial for Edge AI Deployments